88 products
88 products
Sort by:
Connections for Leaky Pipe
HoseSnap connectors which allows easy make / break connections between your garden hose and LeakyPipe.
These Hozelock-type clip on/off connectors are familiar to most gardeners and are the simplest way of bringing water to the LeakyPipe network you have laid out. Easily 'click-on' to connect your hosepipe to the LeakyPipe system when you want to water your plants. Later, disconnect 'click-off' to move your hose to another bed or to use your hose for something else.
Choose the number of outputs you would like;
- Straight - connects to one length of LeakyPipe
- Tee - connects to two lengths of LeakyPipe
Other sizes are available to connect direct to garden hosepipe, 16mm or 20mm supply pipe.
20mm Compression Fitting with connections for LeakyPipe LP12 range.
(One or Two output options available for attaching one or two LeakyPipes)
Connect 20mm blue 'mains' MDPE pipe, to One output to LeakyPipe. Also works with 20mm LDPE Black polytube instead of Blue MDPE tube.
Use these compression fittings where the water is supplied to the garden in 20mm blue MDPE 'mains' pipe. The output end is a barbed fitting which simply pushes onto the LeakyPipe.
Available for one or two LeakyPipe outputs - select from the "Outputs" option box above.
Sold as a single unit, pre-assembled with PTFE tape. The fitting can be rotated once assembled without breaking the seal. High Quality Unidelta brand
Larger outputs are also available.
16 - fits 16mm polytube as single or double output. CLICK HERE
20 - fits 20mm polytube as single or double output. CLICK HERE
Connect LeakyPipe to non-porous supply pipe.
These simple push-fit connectors will join two unequal size pipes together. Simply push together to connect the 2 pipes. No additional fittings or clips are needed.
Available sizes include:
- 16-12 - connect 1/2" hosepipe or 16mm polytube to LeakyPipe
- 20-12 - connect 20mm polytube to LeakyPipe
- 20-16 - connect 20mm polytube to 16mm polytube or 1/2" hosepipe
SOLD IN PACKS OF 5 CONNECTORS
Connect LeakyPipe to garden hosepipe or 16mm or 20mm supply pipe.
T-shaped connector to branch your water supply into LeakyPipe.
These connectors allow LeakyPipe to be connected to the larger non-porous pipes bringing water to your various beds and borders. The LeakyPipe can 'tee' into the side of larger supply pipes as they pass past the area you want to water.
Choose the connector you want above. '12' fits LeakyPipe, '16' fits 1/2" garden hose or 16mm polytube and '20' fits 20mm polytube. Simple push-fit barbs grip the inside of the pipe without the need for additional clips.
SOLD IN PACKS OF 5 CONNECTORS
- 16-12-16 - allows 1 LeakyPipe to tee connect into 16mm polytube
- 20-12-20 - allows 1 LeakyPipe to tee connect into 20mm polytube
- 20-16-20 - allows 16mm polytube to connect into 20mm polytube
A T-shaped connector for branching LeakyPipe, garden hosepipe or 16mm / 20mm supply pipe.
Each pack contains 5 fittings.
T-shaped connector to join 3 pieces of pipe of equal size, in effect 'branching'. A simple push-fit barbed fitting without the need for additional clips. Once connected, the pipe can be rotated on the fitting without breaking the seal. Choose required size as below.
- 12 - LeakyPipe LP12
- 16 - 16mm polytube or 1/2" garden hosepipe
- 20 - 20mm polytube
NB, reducing T connectors available for pipes of unequal size. These T's can be very useful, depending on how you want to lay out your system.
20mm black polytube, available in 50m or 100m rolls
Non-porous 20mm pipe to deliver water from its source to the areas you want to water.
50m or 100m roll of a larger diameter black, non-porous, semi rigid plastic pipe, suitable as a permanent feeder pipe for your irrigation system. This pipe is easily cut with a sharp pair of cutters and is compatible with our range of '20' barbed fittings. The fittings can be gently wiggled into the polytube and will grip on the internal surface without the need for additional clips. In very cold weather, if it is difficult to insert fittings, try dipping the end into a thermos flask of hot water for about 10 seconds and this will soften the pipe slightly. As the pipe cools, it will shrink onto the barbed fittings. Fittings can be rotated in the polytube without breaking the seal.
This LDPE (Low Density PolyEthylene) pipe is 20mm external diameter.
Large selection pack of 30 connectors.
Connects LeakyPipe to 16mm or 20mm supply pipe or garden hose.
A selection of 30 barbed fittings which will enable a wide range of design layouts to be made up to suit your individual design needs, using LeakyPipe and 1/2" hosepipe, 16mm or 20mm polytube supply pipe. The small ends of the fittings connect to LeakyPipe (12mm). You can choose the larger size end: size 16 will fit 1/2" garden hosepipe or 16mm supply pipe, size 20 will fit 20mm supply pipe.
This pack is suggested to be used with a 100m roll of LeakyPipe in terms of providing a good range and number of fittings that you may want for setting up an irrigation system. If you have 50m roll of LeakyPipe, consider a small selection pack.
Pack contains:
- Three - Large Equal Size Tee, (size 16 or 20)
- Two - Large Equal Size Elbows (size 16 or 20)
- Six - Reducing Tee, (size 16/20 to Leaky)
- Five - Reducing Straight, (size 16/20 to Leaky)
- Five - Equal size 12-12-12 Tee. (for branching Leaky in T shape)
- Four - 12-12 straight connector, (Leaky to Leaky).
- Five - 12mm end plugs for sealing the LeakyPipe ends.
Small selection pack of 12 connectors.
Connects LeakyPipe to 16mm or 20mm supply pipe or garden hose.
A selection pack of 12 barbed fittings which will enable a range of designs to be made up using LeakyPipe and 1/2" garden hose, 16mm or 20mm polytube supply pipe. This pack is suggested to be used with a 50m roll of LeakyPipe in terms of providing a good range and number of fittings that you may want for setting up an irrigation system. If you have 100m roll of LeakyPipe, consider a large selection pack.
The small 12mm ends will fit LeakyPipe. The larger ends can either be size 16 (fits 1/2" garden hosepipe or 16mm supply pipe) OR size 20 (fits 20mm supply pipe). Make your selection above.
This Pack of Barbed Fittings Contains:
- Two - large equal tee, (allows branching of supply pipe in T shape).
- Two - large size to LeakyPipe reducing tee, (Leaky 'tee's' out of the side of supply pipe)
- Two - reducing straight connector, (supply pipe to Leaky)
- Two - 12-12-12 tee, (allows branching of LeakyPipe in T shape)
- Two - 12-12 straight connectors, (Leaky to Leaky repair connectors).
-
Two - 12mm end plugs for sealing the LP ends.
End plugs to seal the ends of LeakyPipe, hosepipe and 16 / 20mm supply pipe. Simply push these fittings into the ends of your pipes to seal them off.
Push-fit, barbed plugs to seal the cut ends of your pipes.
SOLD IN PACKS OF 5 CONNECTORS!
Available in 3 sizes:
12mm - fits LeakyPipe® LP12
16mm - fits 16mm polytube supply pipe or 1/2"hosepipe
20mm - fits 20mm polytube supply pipe
Elbow-shaped connectors for LeakyPipe, garden hosepipe or 16 / 20mm polytube supply pipe.
A plastic elbow suitable for making tight corners with LeakyPipe. Simple push fit, no additional clips are needed.
Available in 3 sizes
- 12mm - fits LeakyPipe®
- 16mm - fits 16mm polytube and garden hosepipe
- 20mm - fits 20mm polytube
SOLD IN PACKS OF 5 CONNECTORS
Tap for 20mm supply pipe
A simple tap which allows isolation of areas from your irrigation system. Sold as single unit.
Available in 3 sizes as shown:
- 12mm - fits LeakyPipe®
- 16mm - fits 16mm polytube or garden hosepipe
- 20mm - fits 20mm polytube
These taps allow areas of your watering system to be switched on or off as required. 12mm size allows a section of LeakyPipe to be turned off e.g. a row on a vegetable patch. 16mm or 20mm allow a whole section or your irrigation system to be shut down e.g. a particular border awaiting planting. They have a barbed push-fit connection and clips are not needed.
Please note these are NOT designed to hold back full (static) mains pressure
Versatile, Battery-powered timer for taps.
Connects to one tap and has Two outputs, both individually programmable.
Automatically water your garden while you are on holiday with a simple, reliable tap timer.
There's no easier way of getting two areas automatically watered from one water source at such a cheap price. Simply take the fitting off your tap, exposing the male thread of your tap. (Please note that this has to be a 3/4" BSP thread, normally found on any, modern Garden Tap); Then screw on the Buddy2 timer.
The two outputs of the timer can be programmed to give you differing watering times. Just attach your output fitting to those outputs and then run your piping/hose from here to the LeakyPipe, drippers or sprinklers that you've chosen to use.
Brilliantly reliable & easy to use, but do take them indoors during the Winter!
With a big dial to programme your watering times, this is just about the simplest timer available at a very cheap price. Two good quality alkaline AA batteries will keep this unit running unattended all summer.
Features:
- Simple connection to your tap (3/4" thread).
- 3/4" thread output (suitable for hose snap or compression fittings).
- Programmable by watering duration, time of day and day of week (eg twice per week)
- Manual bypass for easy tap use.
- Rain delay for water conservation.
- Dimensions. 170mm Ht * 170mm W * 60mm D
Please bring this timer inside over winter to protect from frost damage.
For outdoor use with cold water only.
Tap for 16mm supply pipe or garden hosepipe.
A simple tap which allows isolation of areas from your irrigation system. Sold as single unit.
Available in 3 sizes as shown:
- 12mm - fits LeakyPipe®
- 16mm - fits 16mm polytube or 1/2" garden hosepipe
- 20mm - fits 20mm polytube
These taps allow areas of your watering system to be switched on or off as required. 12mm size allows a section of LeakyPipe to be turned off e.g. a row on a vegetable patch. 16mm or 20mm allow a whole section or your irrigation system to be shut down e.g. a particular border awaiting planting. They have a barbed push-fit connection and clips are not needed.
Please note these are NOT designed to hold back full (static) mains pressure.
Tap for LeakyPipe® (12mm size)
A simple tap which allows isolation of areas from your irrigation system. Sold as a single unit.
These taps allow areas of your watering system to be switched on or off as required. 12mm size allows a section of LeakyPipe to be turned off e.g. a row on a vegetable patch 16mm or 20mm allow a whole section or your irrigation system to be shut down e.g. a particular border awaiting planting.
They have a barbed push-fit connection and clips are not needed.
Available in 3 sizes as shown:
- 12mm - fits LeakyPipe®
- 16mm - fits 16mm polytube or garden hosepipe
- 20mm - fits 20mm polytube
Please note these are NOT designed to hold back full (static) mains pressure.
Ever-Popular, Easy to use Battery-powered watering timer for taps.
Single output.
Automatically water your garden while you are on holiday with a simple, reliable tap timer.
Be More Efficient using our Automated Tap Timer
With a big dial to programme your watering times, this is just about the simplest timer available at a very cheap price. Two good quality alkaline AA batteries will keep this unit running unattended all summer.
Features:
- Simple connection to your tap (3/4" thread).
- 3/4" thread output (suitable for hose snap or compression fittings).
- Programmable by watering duration, time of day and day of week (eg twice per week)
- Manual bypass for easy tap use.
- Rain delay for water conservation.
- Dimensions 170mm Ht * 130mm W * 60mm D
Please bring this unit inside over winter to protect from frost damage.
A Bargain, Discounted 100m Kit of The Original Leaky Pipe Porous Rubber Soaker Hose and Connectors.
Protect your investment in hedge plants with LeakyPipe® sub-surface watering hose. Recommended by Professional Landscape Contractors.
Get the Perfect Hedging with our Hedge Watering Kit
Specifically designed and made by us for assured watering, this 100m hedge watering kit includes the original LeakyPipe® LP12L porous rubber soaker hose and connectors. It carries water further and consistently applies it over 100m length, slowly. It enables you to efficiently water new and established hedging. This kit includes all the fittings for a quick hook-up to your garden hose. Of course, you can also plumb this into many different supply pipes, as you want. Just select the appropriate fittings from our "Connections" pages.
The many Advantage of LeakyPipe 100m Watering Kit
- Ideal for watering in new hedging
- Fast establishment and growing-on
- Waters up to 100m length
- Simple push-fit plugs and fittings included
- Adaptable to your hedge layout - cut LeakyPipe with sharp scissors and use 'tee' fittings.
- Hosesnap connectors for easy connection to your garden hose.
- Made in the UK
- Lasts for many years
Put LeakyPipe on the soil near the stems of the hedge plants, plug the LeakyPipe ends, connect to your garden hose, see it work, then cover with mulch or hoe into the topsoil for best efficiency of watering.
Connectors include in this Hedge Watering Kit:
- 1 of HoseSnap to straight connector. (For one LeakyPipe length).
- 1 of HoseSnap to tee connector. (For two lengths of LeakyPipe).
- 5 of 12mm end plugs.
- 5 of 12-12-12mm tees to be able to branch LeakyPipe.
Adjustable Pressure Regulator
An adjustable pressure reducing valve.
An Adjustable Pressure Regulator is a device that will adjust itself to allow a suitable downstream pressure in your pipework/Leaky Pipe. It will do this automatically as the input pressure may vary. It has a 3/4" female input and a 3/4" male output.
Adjust the downstream pressure between 0.7-2.3Bar with a Flat Screwdriver.
Two-way cast Metal Tap Connection
A quality metal fitting to give you two hosesnap outputs.
Convert your single garden tap output into two individually controllable outputs - perhaps one for your LeakyPipe system and the other for filling buckets or connecting your hosepipe?
Unscrew your existing hosesnap connector and screw on this fitting. Comes with brass snap outputs which accept conventional 'hoselock-type' connectors.
Big Benefit. If you want to connect a timer, remove the male output fitting, fit the timer and replace the male output fitting on the bottom of your timer
Distance between outlets is 98mm.
Dims'. 100mm Ht * 130mm W * 50mm D
Three-way cast metal Garden Tap connection
A quality metal fitting to give you three hosesnap outputs.
Do you need more from your Garden Tap?
Frustrated by hooking things on and off?
Convert your single garden tap output into three individually controllable outputs - perhaps one or two for your LeakyPipe system and the other for filling buckets or connecting your hosepipe?
Unscrew your existing hosesnap connector and screw on this fitting. Comes with brass snap outputs which accept conventional 'hoselock-type' connectors.
The Big Bonus is If you want to connect a timer, remove the male output fitting, fit the timer and replace the male output fitting on the bottom of your timer
50m of LeakyPipe and connectors to water several rows of vegetables (including 5 isolation taps)
Grow your own Vegetable Plot with our 50m Watering Kit
Perfect for DIY watering of the fruit and vegetable plot, our watering system is a starter kit containing 50m of LeakyPipe® with a high leak rate (LP12UH) and all the connectors you're likely to need to lay out a watering system, specific to your own vegetable patch.
This irrigation system specially designed to water vegetable plots is really easy to use. Simply cut the LeakyPipe® hose to match the lengths of your rows with secateurs.
A complete Watering Kit for your Vegetable Plots
We've put together pipes and parts to supply you a great kit for efficiently watering these cropping areas. Our 50m vegetable plot watering kit contains enough connectors for 10 rows of vegetables, 5 of which can have isolation taps. It also includes end plugs and 'tee's' to branch the LeakyPipe®.
You will need to supply some garden hosepipe or 16mm supply polypipe to act as a non-leaking header pipe, from which the LeakyPipe® soaker hose branches off. Our porous rubber hoses are used sub-surface by UK Commercial Growers so they'll help you get great crops!
Connectors include:
- 1 of 16-16-16 equal Tee (to 'Tee' hosepipe and start making a header)
- 10 of 16-12-16 reducing Tee (to connect LeakyPIpe to the header)
- 2 of 16 plug (seals end of hosepipe manifold)
- 15 of 12 plugs (seals end of LeakyPipe)
- 5 of 12mm in-line taps (to isolate rows of LeakyPipe)
- 5 of 12-12-12 equal Tee (to branch LeakyPipe)
- 1 of HoseSnap to 16 straight (clip your hose to the manifold)