PIPES

50m Roll of Leaky Pipe to Add to Your Existing System or Purchased Kit

This is smaller in diameter than a garden hose. It needs 12mm barbed connectors to make connections.  Garden Hose fits 16mm barbed connectors.  You can see and choose all the fittings options that link between all pipes, here.  The Best Quality Porous Soakerhose available in the UK. We Manufacture LeakyPipe In-House to Ensure High Standards. This has a 37year track record in Sub-Surface watering in the UK!

LeakyPipe® 50m Hose Pipe is a Reliable Irrigation System

LP12H General Purpose LeakyPipe is a 50m long porous hose which weeps water along its length. It will irrigate 50m lengths of pipe, although several lengths can be happily operated at once. A standard household tap pressure can water up to 300m LeakyPipe® at once. It will not perish or be affected by frost. It is flexible so you can snake it back and forth to water your borders, beds and shrubs.  Buy and see the difference.

16mm black polytube, available in 50m or 100m rolls

Non-porous pipe to supply water from the water source to the area which needs watering.

50m of a black, non-porous, semi rigid plastic pipe, suitable for using as a 'header' pipe or connecting LeakyPipe to a water point. The pipe is 16mm external diameter, similar to 1/2" garden hose and is compatible with our range of '16' barbed fittings. (eg 16-16-16 equal tees, 16-16 elbows etc). The fittings can be gently wiggled into the polytube and will grip on the internal surface without the need for additional clips.  In very cold weather, if it is difficult to insert fittings, try dipping the end into a thermos flask of hot water for about 10 seconds and this will soften the pipe slightly. As the pipe cools, it will shrink onto the barbed fittings.  Fittings can be rotated in the polytube without breaking the seal.

Why buy the cheapest imitation of the real thing. Spend a little more and Try this 50metre Roll of Leaky Pipe® Porous Rubber Soaker Hose with Connectors Provided. See How it Reliably Works.    Always in stock and Fast delivey. Extendable and Proven.

This 50m soaker hose kit is an economical package to buy and benefit from saving your plants from moisture stress, getting them to grow faster.   You get 50metres of LeakyPipe®(LP12H), Two 12mm barbed plugs & the green and black fitting is a Hosesnap to 12mm barbed tee.   

This 50metre Hose Pipe Kit will Easily Irrigate up to 50m as a Single Length. 

Start watering here with a connector supplied.  It will allow you to cut your roll into two lengths of your choice.  Then connect the those lengths of LeakyPipe® to hosepipe using the green and black, hosesnap to barbed tee fitting, to work them at once.  Alternatively, if you want to just run one length of Leaky, just cap-off the redundant tee with a short piece of LP and the spare 12mm barbed plug.  Simple and quick.

100m roll of LeakyPipe; LP12L to extend Hedge Kits.

Especially designed porosity to ensure slow, even watering further along lengths of LeakyPipe.  Matches porosity of Hedge Watering LeakyPipe® LP12L.

The Original Leaky Pipe® Hedge Watering Porous Rubber Soaker Hose.

Specifically Designed and Made Here For The Assured Watering, Establishment and Fast Growing of Hedge Plantings and similar, long-carry applications.  

A 100metre roll of LeakyPipe® LP12L porous rubber hose. This LeakyPipe® is specifically manufactured by us to carry water further and water at a low rate, working up to 100metres from the hose connection. Just lay on the soil, see it work, then cover with mulch or hoe into the topsoil. It is for Sub-surface installation where sweated water moves from its porous wall, upwards as well as outwards from the Pipe.   It will last for years.   We have installations in excess of twenty years

This roll is suitable for adding an additional 100m to your Hedge Watering Kit. It has a lower watering rate than the standard LP12H pipe and shouldn't be used to extend 'normal leak' LeakyPipe®.

Ideal for watering in new hedge planting, ensuring rapid establishment and fast growing-on.  Extend watering times to promote Saturation Conditions if required.

If your hedge branches or is an unusual shape, T connectors will allow the LeakyPipe® to branch as well to follow the route of your hedge. Lay it near the plants - within 30-50cm as the water will spread laterally.

Ground stake for 16mm or 20mm supply polypipe

These ground stakes will work if pushed into firm soil. They can be used to hold supply pipe in place, often until further soil is put on top as another means of spotting down the supply pipe.

They are generally not needed for the LeakyPipe as this will lie flat if the 'wind' is taken out - see video here.   They are not an essential, but can be handy.

140mm long.  One size, fits pipe up to 20mm diameter. Sold individually.

50m roll of LeakyPipe® to extend Hedge Kits.

Especially designed porosity to water longer lengths of pipe.
Matches porosity of Hedge Watering LeakyPipe® LP12L

The Original Leaky Pipe Hedge Watering Porous Rubber Soaker Hose.

Specifically Designed and Made Here For The Assured Watering, Establishment and Fast Growing of Hedge Plantings and similar subjects.  

A 50metre roll of LeakyPipe® LP12L porous rubber hose. This LeakyPipe is specifically manufactured by us to carry water further and water at a low rate, working up to 100metres from the hose connection. Just lay on the soil, see it work, then cover with mulch or hoe into the topsoil. It will last for years. 

This roll is suitable for adding an additional 50m to your Hedge Watering Kit.  It has a lower watering rate than the standard LP12H pipe and shouldn't be used to extend 'normal leak' LeakyPipe.    You may wish to add some 12mm barbed fittings to your order.  

Ideal for watering in new hedge planting, ensuring rapid establishment and fast growing-on. Extend watering times to promote Saturation Conditions if required.

If your hedge branches or is an unusual shape, T connectors will allow the LeakyPipe to branch aswell to follow the route of your hedge. Lay it near the plants - within 30-50cm as the water will spread laterally. LeakyPipe works by wicking water into the soil it contacts and therefore works best if hoed into the topsoil or covered by mulch.

250m Roll of Leaky Pipe Porous Rubber Soaker Hose (LP12H)

The Best Quality 250m Porous Hose Pipe Available in the UK.

We manufacture LeakyPipe irrigation systems to Ensure High Standards.

LP12H General Purpose LeakyPipe is a porous hose which weeps water along its length. It will irrigate 50m lengths of pipe, although several lengths can be watered at once. A standard household tap pressure can water up to 300m LeakyPipe at once. It will not perish or be affected by frost. It is reasonably flexible so you can snake it back and forth to water your borders, beds and shrubs. Arrange as rings or spiral around newly planted trees to aid their establishment. It works most efficiently when covered by a mulch or soil as evaporation is reduced. Overall you use less water with Leaky Pipe systems than watering by hand and it will work out-of-sight whilst you enjoy your garden.

250m long porous hose pipe for optimal garden irrigation

Available in 50m, 100m, 250m, 450m rolls.

100m Roll of LeakyPipe Porous Rubber Soaker Hose (LP12H)

Try LeakyPipe 100m porous soaker hose.  This is smaller in diameter than a garden hose. It needs 12mm barbed connectors to make connections.  Garden Hose fits 16mm barbed connectors.  You can see and choose all the fittings options that link between all pipes, here.   We produce our own garden watering systems. We Manufacture in-house to ensure high standards.

Why Should you Use LeakyPipe 100m soaker hose?   Thirty-seven year use in the UK.

LeakyPipe® LP12H is a 100m soaker hose which weeps water along its length.

It will irrigate 50m lengths of pipe, although several lengths can be happily operated at once. A standard household tap pressure can water up to 300m LeakyPipe at once. It will not perish or be affected by frost. Try the original leaky pipe porous soaker hose and water properly your garden with this cost-effective irrigation system.

This soaker hose 100m is enough flexible so you can snake it back and forth to water your borders, beds and shrubs.

Arrange as rings or spiral around newly planted trees to aid their establishment. It works most efficiently when covered by a mulch or soil as evaporation is reduced. Overall you use less water with LeakyPipe® hose than watering by hand and it will work out-of-sight whilst you enjoy your garden. Option.
- Extend the time you water with this to provide Saturation Hose effect.

This porous soaker hose is also available in 50m, 100m, 250m, 450m rolls.

N.B: This pipe is not designed to used from a water butt, without pumping.

Our 100m Porous Soaker Hose has already satisfied many Customers

The 100m hose pipe kit is ideal as a starter unit. It can be used as one length or cut to make several shorter sections.

✔ Arrange connections with our range of 12mm and associated barbed fittings.

20mm black polytube, available in 50m or 100m rolls

Non-porous 20mm pipe to deliver water from its source to the areas you want to water.

50m or 100m roll of a larger diameter black, non-porous, semi rigid plastic pipe, suitable as a permanent feeder pipe for your irrigation system. This pipe is easily cut with a sharp pair of cutters and is compatible with our range of '20' barbed fittings.  The fittings can be gently wiggled into the polytube and will grip on the internal surface without the need for additional clips.  In very cold weather, if it is difficult to insert fittings, try dipping the end into a thermos flask of hot water for about 10 seconds and this will soften the pipe slightly. As the pipe cools, it will shrink onto the barbed fittings.  Fittings can be rotated in the polytube without breaking the seal.

This LDPE (Low Density PolyEthylene) pipe is 20mm external diameter.

50m Roll of LeakyPipe LP12EQ Equestrian Arena System repair kit

Manufactured by us, here in Kent, to ensure very high standards, for specific, sub-surface use in Equestrian Sand Constructions . 

LeakyPipe®LP12EQ 50m Roll for Repair & Maintenance of Sub-Surface Networks in Riding Arenas, Gallops & Menages.

10 of 12-12 barbed connectors included.

Cut and splice into your existing system, as needed.

400m Roll of Leaky Pipe Porous Rubber Soaker Hose (LP12H)

High quality 400m long porous hose pipe available in the UK. 

We manufacture LeakyPipe to ensure high standards.

LP12H General Purpose LeakyPipe is a porous garden hose which weeps water along its length. It will irrigate 50m lengths of pipe, although several lengths can be watered at once. A standard household tap pressure can water up to 300m LeakyPipe at once. It will not perish or be affected by frost. It is reasonably flexible so you can snake it back and forth to water your borders, beds and shrubs. Arrange as rings or spiral around newly planted trees to aid their establishment. It works most efficiently when covered by a mulch or soil as evaporation is reduced. Overall you use less water with LeakyPipe than watering by hand and it will work out-of-sight whilst you enjoy your garden.

The Original 400m porous hose pipe by Leaky Pipe

Soaker hose also available in 50m, 100m, 250m, 400m rolls.

400m Roll of LeakyPipe Hedge watering pipe (LP12L)
Low leak rate to Carry Water Further.

Get superb results from your Planting Schemes with The Best Quality Porous Hose Available in the UK.  This is smaller in diameter than a garden hose. It needs 12mm barbed connectors to make connections.  Garden Hose fits 16mm barbed connectors.  You can see and choose all the fittings options that link between all pipes, here.

We manufacture LeakyPipe® to Ensure High Standards. Hosepipe Ban Exempt.  This LeakyPipe® has a Thirty-seven year history in the UK.  

400metre roll of LeakyPipe LP12L porous rubber hose. This hedge watering pipe is specifically manufactured by us to carry water further and water at a low rate, working up to 100metres from the hose connection. Just lay on the soil, see it work, then cover with mulch or hoe into the topsoil. It will last for years. 

Ideal for watering in new hedge planting, ensuring rapid establishment and fast growing-on.

Also available as a kit with a range of hosesnap connectors, 'tees' and plugs. Click here for our range of Hedge Watering Kits. 

Generally the leaky pipe only needs to be placed on just one side of the planting, unless the plants are large (e.g. over 1m tall when planted) in which case we suggest a length of leaky pipe is laid on either side of the root ball..

Lay it near the plants - within 30-50cm as the water will spread laterally.

250m Roll of LeakyPipe Hedge watering pipe (LP12L)
Low leak rate

The Best Quality Porous Hose Available in the UK. We manufacture LeakyPipe to Ensure High Standards.    This is smaller in diameter than a garden hose. It needs 12mm barbed connectors to make connections.  Garden Hose fits 16mm barbed connectors.  You can see and choose all the fittings options that link between all pipes, here.

250metre roll of LeakyPipe LP12L porous rubber hose. This hedge watering pipe is specifically manufactured by us to carry water further and water at a low rate, working up to 100metres from the hose connection. Just lay on the soil, see it work, then cover with mulch or hoe into the topsoil. It will last for years. 

Ideal for watering in new hedge planting, ensuring rapid establishment and fast growing-on.  Also available as a kit with a range of hosesnap connectors, 'tees' and plugs. Click here for our range of Hedge Watering Kits. 

Generally the leaky pipe only needs to be placed on just one side of the planting, unless the plants are large (e.g. over 1m tall when planted) in which case we suggest a length of leaky pipe is laid on either side of the root ball.

Lay it near the plants - within 30-50cm as the water will spread laterally. The leaky pipe works by wicking water into the soil it contacts and therefore works best if hoed into the topsoil or covered by mulch.

The leak rate of this leaky pipe (LP12L) will allow watering for 100m from a typical domestic water source. You can water through several lengths of leaky pipe at once (each max 100m long) and a typical water source will generally water up to 500m cumulative length of this leaky pipe

Technical information: Leak rate of 0.75 - 1.5L water per linear meter per hour at 1-2 Bar.