88 products
88 products
Sort by:
Connections for Leaky Pipe
50m Roll of Leaky Pipe to Add to Your Existing System or Purchased Kit
This is smaller in diameter than a garden hose. It needs 12mm barbed connectors to make connections. Garden Hose fits 16mm barbed connectors. You can see and choose all the fittings options that link between all pipes, here. The Best Quality Porous Soakerhose available in the UK. We Manufacture LeakyPipe In-House to Ensure High Standards. This has a 37year track record in Sub-Surface watering in the UK!
LeakyPipe® 50m Hose Pipe is a Reliable Irrigation System
LP12H General Purpose LeakyPipe is a 50m long porous hose which weeps water along its length. It will irrigate 50m lengths of pipe, although several lengths can be happily operated at once. A standard household tap pressure can water up to 300m LeakyPipe® at once. It will not perish or be affected by frost. It is flexible so you can snake it back and forth to water your borders, beds and shrubs. Buy and see the difference.
20mm to 16mm Compression Straight Adaptor
Sold Individually
20mm to 16mm compression adaptor for permanent, secure, leak-free connections between 20mm black LDPE supply polypipe or blue MDPE pipe AND 16mm black LDPE supply polypipe or garden hosepipe.
- Secure connection, seals on the external surface of pipe.
- Fits 20mm black LDPE supply polypipe click here to buy
- Fits 20mm blue MDPE supply pipe
20mm to 16mm compression adaptor for permanent, secure, leak-free connections between 20mm black LDPE supply polypipe or blue MDPE pipe AND 16mm black LDPE supply polypipe or garden hosepipe.
16mm black polytube, available in 50m or 100m rolls
Non-porous pipe to supply water from the water source to the area which needs watering.
50m of a black, non-porous, semi rigid plastic pipe, suitable for using as a 'header' pipe or connecting LeakyPipe to a water point. The pipe is 16mm external diameter, similar to 1/2" garden hose and is compatible with our range of '16' barbed fittings. (eg 16-16-16 equal tees, 16-16 elbows etc). The fittings can be gently wiggled into the polytube and will grip on the internal surface without the need for additional clips. In very cold weather, if it is difficult to insert fittings, try dipping the end into a thermos flask of hot water for about 10 seconds and this will soften the pipe slightly. As the pipe cools, it will shrink onto the barbed fittings. Fittings can be rotated in the polytube without breaking the seal.
A versatile kit allowing you to water 10 hanging baskets or patio pots.
A package containing 10 pressure-compensating button drippers, 10metres of fine "spaghetti" tube and 10 plastic stakes to retain the end of the tube, where you want the drips to fall from. The drippers are for insertion into sidewall of 16mm and 20mm black, LDPE polytubes (and some hosepipes).
The Spagetti tube is 4mm in diametre and is to discreetly carry the water from the output of the dripper to the hanging basket or patio pot. The stake is to retain the open end of the tube in position when working. (Detach the stake and jam the pointy end back into the end of the tube, to make a temporary seal).
Save your plants. Use 250m Kit of The Original Leaky Pipe® Porous Soaker Hose and Connectors.
250m Hedge Watering Kit with Leaky Pipe LP12L and Connectors.
✔ Protect your investment in hedge plants with LeakyPipe® sub-surface watering hose
✔ Just lay on the soil, see it work, then cover with mulch or hoe into the topsoil. It will last for years
✔ Recommended by Professional Landscape Contractors
This 250m roll of LeakyPipe LP12L porous rubber hose kit with connectors is specifically manufactured by us to carry water further and water at a low rate, workin up to 100metres from the hose or supply pipe connection.
What's included in this Hedge Watering Kit?
This hedge watering kit has HoseSnap connectors for fast hook-up to your hose. Also some tees and plugs to allow you some connection options. All you need is a pair of sharp scissors to cut the leaky pipe and fit it to your hedge planting layout.
Ideal for watering in new hedge planting, ensuring rapid establishment and fast growing-on.
Connectors include:
- 2 of HoseSnap to straight connector (for one LeakyPipe® length);
- 2 of HoseSnap to tee connector (for two lengths of leaky pipe);
- 10 of 12mm end plugs; To seal ends of LeakyPipe®
- 5 of 12-12-12mm tees to be able to branch the leaky pipe;
- 10 of 16-12 reducer connectors (in case you need to span pathways with hosepipe between leaky pipes)
For even more irrigation systems, discover our full range of Leaky Pipe Watering Kits!
How and where to use this Hedge Watering Kit?
Why buy the cheapest imitation of the real thing. Spend a little more and Try this 50metre Roll of Leaky Pipe® Porous Rubber Soaker Hose with Connectors Provided. See How it Reliably Works. Always in stock and Fast delivey. Extendable and Proven.
This 50m soaker hose kit is an economical package to buy and benefit from saving your plants from moisture stress, getting them to grow faster. You get 50metres of LeakyPipe®(LP12H), Two 12mm barbed plugs & the green and black fitting is a Hosesnap to 12mm barbed tee.
This 50metre Hose Pipe Kit will Easily Irrigate up to 50m as a Single Length.
Start watering here with a connector supplied. It will allow you to cut your roll into two lengths of your choice. Then connect the those lengths of LeakyPipe® to hosepipe using the green and black, hosesnap to barbed tee fitting, to work them at once. Alternatively, if you want to just run one length of Leaky, just cap-off the redundant tee with a short piece of LP and the spare 12mm barbed plug. Simple and quick.
Pro-quality, 16mm compression to 3/4" female threaded adaptor.
There is no more secure way of quickly attaching 16mm supply pipe to a male thread (like the one you'll find on the output of a watering timer), than with this fitting. 16mm compressions will also make a tight fit onto most Garden Hosepipes too.
No fancy tools needed to fit this adaptor! Just a sharp cutter.
The fitting comprises three main parts.
A black "body”, housing an internal, rubber "O” ring
A blue threaded collar and a White plastic, toothed split ring.
To make "compression” connection to a pipe, firstly feed the blue collar onto the pipe. Then push the white split collar onto the pipe, just enough for the pipe to project about 25mm from the white collar. Now offer the end of the pipe to the fitting body. Push the pipe into the body and you’ll feel it stop against the internal "O” ring. With a little more push & a wiggle, the pipe will slip passed the "O” ring for a further 25mm. This will leave the white collar, settled very close to the black body.
All you need to do after this is simply do-up the blue collar to hold the four things together! It doesn’t need to be tight and the brilliant thing is, you can disassemble it very easily too. They won’t blow apart and the seal is successful by way of the "O” ring sealing on the outside of the pipe wall. Clever, isn’t it?
Just wrap PTFE "White" tape clockwise around the Male "Mating" thread, then wind the male and female threads together, to make that connection. Sometimes you can achieve a compression seal between these two by inserting one or two rubber, flat washers into the female part, before doing-up the Male part.
25mm Compression Tee to LeakyPipe connector.
(1 or 2 LeakyPipe output options)
Connect 25mm blue 'mains' pipe to 1 or 2 outputs of LeakyPipe.
Use these fittings where the water is supplied to the garden in 25mm blue MDPE 'mains' pipe. The compression fitting is elbowed so that outputs are at 90degrees, very useful when the blue pipe is vertical as a 'riser' pipe. The output end is a barbed fitting which simply pushes onto the LeakyPipe.
The following outputs are available:
12 - fits LeakyPipe as single or double output
16 - fits 16mm polytube as single or double output
20 - fits 20mm polytube as single or double output
Sold as a single unit, pre-assembled with PTFE tape. The fitting can be rotated once assembled without breaking the seal.
This is a great deal for raised borders, raised troughs or planters with a total area of up to 50m2. Kits includes push-fit connectors and options for Supply Pipe.
A comprehensive Kit to discreetly water up to 50m2 of raised beds or planters. Customise your kit by selecting sufficient connectors for 5-10 raised beds and choose between several options for supply pipe.
This kit includes lots of push-fit 'elbow' connectors to help fit an irrigation system to existing raised beds, borders, planters and troughs. You will need non-leaking supply pipe to carry the water up and over the wall of your bed. You can choose supply pipe to be included in your kit, or use small amounts of 1/2" garden hosepipe, which will also work with the connectors. Once at soil level, the pipe size 'reduces' down to that of LeakyPipe.
The LeakyPipe can be laid on the surface or covered in mulch which helps water wicking away from the LeakyPipe. Arrange the LeakyPipe around your plants. Moisture spreads outwards for about 12 inches / 30cm either side. If you need to branch the LeakyPipe within the bed, 'tee' connectors are included, as are 'plugs' for the ends of LeakyPipe. A nail-in pipe clip keeps the pipe neatly in place on top of the wall of your raised bed / border. Lastly, a quick-connect hose-snap connector will allow connection to your garden hose.
This Kit includes a 100m roll of LP12H LeakyPipe, which is designed to be ideal for general purpose watering, working up to 50metres from the barbed connections. It has proven to last in excess of ten years.
How to customise your kit
- Select the number of raised beds you have
- Select if you would like any supply pipe (size and length). The fittings will be adjusted to ensure they are compatible with your selection.
- Double check the total area of your beds do not exceed 50m2 - this will ensure that 100m of LeakyPipe at 50cm spacing is sufficient for your beds.
Items included:
- 100m roll of LeakyPipe LP12H Porous Rubber Hose.
- 3 of 16-16-16 tees. (allows branching of the supply pipe network)
- 2 of 16 elbows. (may be useful for supply network)
- 4 of 16 plugs. (A tidy way of sealing supply pipe or garden hose).
- 2 of 12-12 connectors. (To connect Leaky-Leaky, a useful repairer).
- 1 of HoseSnap to 16mm single connector (quick snap-on connection to regular garden hose)
Each bed will get an additional set of:
- 1 of 16-16-16 tee. (To branch supply pipe up behind your bed)
- 3 of 16 elbows (To bring supply pipe neatly over the wall of the raised bed)
- 1 of 16-12 reducer (To reduce pipe size to that of LeakyPipe)
- 1 of 12-12-12 tee (To branch LeakyPipe within the bed)
- 2 of 12 plugs (to seal the end of LeakyPipes)
- 1 of nail-in pipe clip (To keep supply pipe neatly in place on top of the retaining wall)
Imagine this. Firstly, find a way of running the Supply tubing onto all the places you wish to water. Use the Tee connection fittings and a pair of cutters, to tailor the tubing to give you a "Distribution Network" to carry the water to where you will be connecting the Leaky Pipe with the reducing connections. Run the LeakyPipe near to the plants, - (within 30-50cm as the water will spread laterally) and plug the ends. (See this Video about fittings).
20mm Compression Straight Couple Fitting
20mm compression couple for permanent, secure, leak-free connections in 20mm black LDPE supply polypipe and blue MDPE pipe.
Secure connection, seals on the external surface of pipe.
Fits 20mm black LDPE supply polypipe click here to buy
Fits 20mm blue MDPE supply pipe
20mm compression Straight for reliable, secure, leak-free connections in 20mm black LDPE supply polypipe and blue MDPE pipe.
20mm Compression to LeakyPipe® connector
(To one or two lengths of Leaky Pipe options)
Connect one or two LeakyPipe lines into a length of 20mm blue MDPE 'mains' pipe
Use these fittings where the water is supplied to the garden in 20mm blue MDPE 'mains' pipe. The output end is a barbed fitting which simply pushes onto the LeakyPipe. See our video help on using compression fittings.
The following outputs are available.
12 - fits LeakyPipe as single or double output
16 - fits 16mm polytube as single or double output
20 - fits 20mm polytube as single or double output
Sold as a single unit, pre-assembled with PTFE tape. The fitting can be rotated once assembled without breaking the seal
Easy to use Battery-powered Watering Timer for Garden Taps.
Single output. Now, we do have stock of this timer.
Automatically water your garden while you are on holiday with a simple, reliable tap timer.
Surely the Easiest Tap Timer to Use
Similar to the great-value "Buddy” range, but with a heavier-duty brass input connection and better flow characteristics. With a big dial to program your watering times, this is just about the simplest timer available at a very cheap price. Two good quality alkaline AA batteries will keep this unit running unattended all summer.
Features:
- Simple connection to your tap.
- 3/4" thread output (suitable for hose snap or compression fittings).
- Programmable by watering duration, time of day and day of week (eg twice per week)
- Manual bypass for easy tap use.
- Rain delay for water conservation.
- 170mm High by 130mm wide by 60mm deep
Please bring this unit inside over winter to protect from frost damage.
100m roll of LeakyPipe; LP12L to extend Hedge Kits.
Especially designed porosity to ensure slow, even watering further along lengths of LeakyPipe. Matches porosity of Hedge Watering LeakyPipe® LP12L.
The Original Leaky Pipe® Hedge Watering Porous Rubber Soaker Hose.
Specifically Designed and Made Here For The Assured Watering, Establishment and Fast Growing of Hedge Plantings and similar, long-carry applications.
A 100metre roll of LeakyPipe® LP12L porous rubber hose. This LeakyPipe® is specifically manufactured by us to carry water further and water at a low rate, working up to 100metres from the hose connection. Just lay on the soil, see it work, then cover with mulch or hoe into the topsoil. It is for Sub-surface installation where sweated water moves from its porous wall, upwards as well as outwards from the Pipe. It will last for years. We have installations in excess of twenty years
This roll is suitable for adding an additional 100m to your Hedge Watering Kit. It has a lower watering rate than the standard LP12H pipe and shouldn't be used to extend 'normal leak' LeakyPipe®.
Ideal for watering in new hedge planting, ensuring rapid establishment and fast growing-on. Extend watering times to promote Saturation Conditions if required.
If your hedge branches or is an unusual shape, T connectors will allow the LeakyPipe® to branch as well to follow the route of your hedge. Lay it near the plants - within 30-50cm as the water will spread laterally.
Adjustable Pressure Regulator with Gauge; 20mm Compression Output Fitting.
3/4" BSP input port - 20mm compression output fitting to 20mm polytube, (supply) pipe.
This is an adjustable pressure regulator with a working range between 0.7 - 2.2bar. Pressure gauge fitted is 0-4bar and is glycerine-filled. This unit also has a 20mm compression output fitting to allow you to attach it to 20mm LDPE Black polytube and 20mm MDPE Blue Polypipe. There is an option for 16mm compression. Please ask us if you need this.
Trust the best Porous Hose, LeakyPipe®, in a Handy Kit for people with two hundred square metres of soft landscaping to water. Buy this kit of 250m of LeakyPipe with all these connectors including HoseSnap fittings, tees and plugs to connect into your hosepipe. Especially for new & established planting in Beds and Borders.
250m of LeakyPipe and a variety of connectors to tailor a system to your own garden watering needs. You can cut & use some of your own hosepipe with these fittings, or buy additional non-leaking polytube, "Supply" pipe.
This Kit comes with fittings that allow you to connect LeakyPipe® to either 20mm black polytube or to Garden Hose (and 16mm black polytube). Choose from the "Supply Pipe Size" option box.
This Hose Pipe Kits is Perfect to Water a Medium Sized Garden
LeakyPipe is a porous hose which weeps water along its length. It will irrigate up to 50m as a single length, but here, the connector supplied will allow you to cut your roll appropriately, then connect two lengths of LeakyPipe to run at once.
A standard household tap pressure can water up to 300m LeakyPipe at once. So you you should be able to make all of this work, "all at once"!
It is reasonably flexible so you can snake it back and forth to water your borders, beds and shrubs. Arrange as rings or spiral around newly planted trees to aid their establishment. It works most efficiently when covered by a mulch or soil as evaporation is reduced.
Overall you use less water with LeakyPipe than watering by hand and it will work out-of-sight whilst you enjoy your garden.
Connectors Included in the 250m Hose Pipe Kit:
- Two, HoseSnap-12 (LeakyPipe) straights.
- Two, HoseSnap to 12 (LeakyPipe) tees.
- Ten, Plugs for Leaky Pipe.
- Five, 16-12 or 20-12 (Hose to LeakyPipe) straights.
- Six, 16-12-16 or 20-12-20 Reducing Tees, (Hose to LeakyPipe).
- Five, 12-12-12equal tees (Leaky-Leaky).
- Four, 12-12 (LeakyPipe to LeakyPipe) connectors.
N.B. This pipe is not designed to used from a water butt, without pumping. But it works really well with a timer!
See this short video about using connectors.
See this narrated video on system concepts and design.
Or the silent video about LeakyPipe layout in Gardens on the videos tab
25mm Compression Elbow to LeakyPipe® connector.
(1 or 2 output options)
Use these fittings where the water is supplied to the garden in 25mm blue MDPE 'mains' pipe. The compression fitting is elbowed so that outputs are at 90degrees, very useful when the blue pipe is vertical as a 'riser' pipe. The output end is a barbed fitting which simply pushes onto the LeakyPipe.
The following outputs are available:
12 - fits LeakyPipe as single or double output
16 - fits 16mm polytube as single or double output
20 - fits 20mm polytube as single or double output
Sold as a single unit, pre-assembled with PTFE tape. The fitting can be rotated once assembled without breaking the seal.
25mm Compression to LeakyPipe connector
(One or Two output options)
Connect 25mm blue 'mains' pipe to 1 or 2 lengths of LeakyPipe.
Use these fittings where the water is supplied to the garden in 25mm blue MDPE 'mains' pipe. The output end is a barbed fitting which simply pushes onto the LeakyPipe.
The following outputs are available.
12 - fits LeakyPipe as single or double output
16 - fits 16mm polytube as single or double output
20 - fits 20mm polytube as single or double output
Sold as a single unit, pre-assembled with PTFE tape. The fitting can be rotated once assembled without breaking the seal
Ground stake for 16mm or 20mm supply polypipe
These ground stakes will work if pushed into firm soil. They can be used to hold supply pipe in place, often until further soil is put on top as another means of spotting down the supply pipe.
They are generally not needed for the LeakyPipe as this will lie flat if the 'wind' is taken out - see video here. They are not an essential, but can be handy.
140mm long. One size, fits pipe up to 20mm diameter. Sold individually.
A Screw-on pipe clip for wall mounting 16mm polypipe
What can we add? It’s self-explanatory. This is a great clip for retaining metric polypipes on brick walls or timber fences. Just use a suitable screws and plugs as necessary.
Pipe clips can be clipped together if you wish to run several parallel pipes.