WATERING KITS

Why buy the cheapest imitation of the real thing. Spend a little more and Try this 50metre Roll of Leaky Pipe® Porous Rubber Soaker Hose with Connectors Provided. See How it Reliably Works.    Always in stock and Fast delivey. Extendable and Proven.

This 50m soaker hose kit is an economical package to buy and benefit from saving your plants from moisture stress, getting them to grow faster.   You get 50metres of LeakyPipe®(LP12H), Two 12mm barbed plugs & the green and black fitting is a Hosesnap to 12mm barbed tee.   

This 50metre Hose Pipe Kit will Easily Irrigate up to 50m as a Single Length. 

Start watering here with a connector supplied.  It will allow you to cut your roll into two lengths of your choice.  Then connect the those lengths of LeakyPipe® to hosepipe using the green and black, hosesnap to barbed tee fitting, to work them at once.  Alternatively, if you want to just run one length of Leaky, just cap-off the redundant tee with a short piece of LP and the spare 12mm barbed plug.  Simple and quick.

A fully comprehensive Garden Hose Kit of LeakyPipe, SupplyPipe, Timer and Connectors for the person who wants to put an automatic watering system together, really quickly! 

Trust LeakyPipe® to water your investment. This is a great deal for 100metres of LeakyPipe, Connections, SupplyPipe; Timer to take the watering chore away from Gardening. 

This 100 metres package is tailored for an application that may use a variety of lengths from 100 to 150 metres of LeakyPipe. So there's scope to add more later, should you wish. This Kit uses LP12H LeakyPipe, which is designed to be ideal for general purpose watering. 

This LeakyPipe is specifically manufactured by us to work on top of the ground, if you wish, but it's better sub-mulch or soil, working up to 50 metres from every barbed connection. It has proven to last more than ten years. Ideal for watering beds and borders, planters, trees and hedge lines (up to 50m long). It operates under water pressures of up to 2.5 bar.    Ideal would be between 1-2Bar (15-30psi).   

High-quality items included:- 

• 100metre roll of LeakyPipe® LP12H Porous Rubber Hose.
• 50 metres of external diameter 16mm Black LDPE Supply Pipe.
• 1 of Orbit made, "Buddy One" Timer for Tap Connection. See here 
• 5 of 16-12 Reducer Connectors. (Supply to LeakyPipe).
• 10 of 16-12-16 Reducer Tees. (Supply-Leaky-Supply).
• 3 of 16-16-16 Tees.  (Supply-Supply-Supply).
• 5 of 12-12-12 Tees.  (To "Branch" LeakyPipe to itself). 
• 15 of 12 plugs. (A tidy way to plug LeakyPipe ends). 
• 2 of 16 plugs. (A tidy way of sealing 16 supply pipe).
• 2 of 12-12 hose connectors. (To connect Leaky-Leaky).
• 2 of 16-16 hose connectors. (To connect supply pipe to your hosepipe if you wish)
  

A full 250m Garden Hose Kit including LeakyPipe®, non-porous Supply Pipe, Timer and Connectors

Spend a bit more and buy the best LeakyPipe; from the people who have made it the longest. A great deal for 250metres of LeakyPipe, Connections, SupplyPipe and two-zone Timer.

Ideal for the person who wants to put an automatic watering system together, really quickly!   

Stop dragging garden hose pipe around and look no further. Leaky Pipe Systems has been manufacturing for years, the best irrigation systems including this 250m garden hose kit. 

This 250metre package is tailored for an application that may use 250-500metres of LeakyPipe. So there's scope to add more later, should you wish. This Kit uses LP12H LeakyPipe®, which is designed to be ideal for general purpose watering. 

Our 250m Garden Hose Kit is an innovative, professional system

This LeakyPipe 250metre hose pipe kit is specifically made by us to work on top of the ground, if you wish, as well as sub-surface, sub-mulch; working up to 50metre lengths from the barbed connections to hose or polypipes. Designed for professionals, it will bring you full satisfaction. Our customers already love it and it is part of our best-selling garden hose pipe kits. Just give it a try!

✔ The 250m garden hose kit has proven to last in excess of ten years.

This one is ideal for watering beds and borders, planters, trees and hedgelines (LP use, up to 50metres long). Although we have specific hedge watering kits that will perfectly do the job, when they are over 100metres long.

Buying LeakyPipe 250m hose pipe kit, you will also have the following items

- 250 metres of LeakyPipe LP12H Porous Rubber Hose.
- 100 metres of 16mm Black Supply Pipe.
- 1 of Buddy2 Timer for Tap Connection (With two 16mm Compression fittings).here

- 5 of 16-12 Reducer Connectors (Supply to LeakyPipe).
- 20 of 16-12-16 Reducer Tees (Supply-Leaky-Supply).
- 3   of 16-16-16 Tees (Supply-Supply-Supply).
- 5 of 12-12-12 Tees (To "Branch" LeakyPipe to itself). 
- 20 of 12 plugs (A tidy way to plug LeakyPipe ends).
- 2 of 16 plugs (A tidy way of sealing 16 supply pipe).
- 5 of 12-12 connectors (To connect Leaky-Leaky).
- 2 of 16-16 connectors (connect Supply Pipe to your hosepipe if you wish)

Protect your investment in time and money on plants. Get them Growing Fast with this Great Deal for 400metres of LeakyPipe; Porous Hose, Connections, SupplyPipe, Timer with Pressure Regulators. A complete package to save plant life now!

This 400metre combo kit is tailored for an application that may use 300-700metres of leaky pipe. So there is scope to add more later, should you wish. This garden porous hose kit uses LP12H leaky pipe, which is designed to be ideal for general purpose watering.       

This LeakyPipe all-inclusive combination kit is specifically manufactured by us to work on top of the ground, if you wish, as well as sub-mulch or sub-soil working up to 50metres from the barbed connections. It has proven to last in excess of ten years.

Leaky Pipe's garden porous hose kit is ideal for watering beds and borders, planters, trees and hedgelines (up to 50metres long), lawn and plants. There is a 20mm supply pipe for good, efficient water movement and less pressure drop through your distribution network. Moreover, we have put pressure regulators on the Buddy2 zone timer for you, to ensure the system does not get over-pressurised.  

Items included:

- 400 metres of leaky pipe LP12H porous rubber hose;
- 100 metres of 20mm black supply pipe;
- 1 of Buddy2 Timer for tap connection; (Assembled with two pressure regulators & two 20mm Compression Fittings)
- 5 of 20-12 Reducer Connectors. (Supply to LeakyPipe);
- 20 of 20-12-20 Reducer Tees (Supply-Leaky-Supply);
- 3 of 20-20-20 Tees.  (Supply-Supply-Supply);
- 5 of 12-12-12 Tees.  (To "Branch" leaky pipe to itself);
- 20 of 12 plugs.  (A tidy way to plug leaky pipe ends);
- 2 of 20 plugs.   (A tidy way of sealing 20mm supply pipe);
- 5 of 12-12 connectors.  (To connect/repair Leaky-Leaky).
- 2 of 20-16 connectors (connect Supply Pipe to your hosepipe if you wish)

Variety of lengths available to fit a wide range of hoses. Please note that the garden hose reel is not included. You may also be interested in discovering our full range of Leaky Pipe Watering Kits & Leaky Pipe Porous Hoses.

How to use Leaky Pipe's all-inclusive Garden Hose Kit?

This is a great deal for 50metres of LeakyPipe, Connections and SupplyPipe.

Ideal for raised garden beds, raised borders, raised troughs or planters.

A comprehensive Kit to discreetly water up to 25m2 of raised beds or planters. Customise your kit by selecting sufficient connectors for 2-6 raised beds and choose between several options for supply pipe.

This kit includes lots of push-fit 'elbow' connectors to help fit an irrigation system to existing raised beds, borders, planters and troughs. You will need non-leaking supply pipe to carry the water up and over the wall of your bed. You can choose supply pipe to be included in your kit, or use small amounts of 1/2" garden hosepipe, which will also work with the connectors. Once at soil level, the pipe size 'reduces' down to that of LeakyPipe.  The LeakyPipe can be laid on the surface or covered in mulch which helps water wicking away from the LeakyPipe. Arrange the LeakyPipe around your plants. Moisture spreads outwards for about 12 inches / 30cm either side. If you need to branch the LeakyPipe within the bed, 'tee' connectors are included, as are 'plugs' for the ends of LeakyPipe.

A nail-in pipe clip keeps the pipe neatly in place on top of the wall of your raised bed / border. Lastly, a quick-connect hose-snap connector will allow connection to your garden hose.  

This Kit includes 50m roll of LP12H LeakyPipe, which is designed to be ideal for general purpose watering, working up to 50metres from the barbed connections.  It has proven to last in excess of ten years.

How to customise your kit 

1. Select the number of raised beds you have
2. Select if you would like any supply pipe (size and length). The fittings will be adjusted to ensure they are compatible with your selection.
3. Double check the total area of your beds do not exceed 25m2 - this will ensure that 50m of LeakyPipe at 50cm spacing is sufficient for your beds.

Items included:

• 50m roll of LeakyPipe LP12H Porous Rubber Hose
• 1 of 16-16-16 Tee.  (Allows branching of your supply network)
• 2 of 16 plugs.   (A tidy way of sealing supply pipe or garden hose)
• 2 of 12-12 connectors.  (To connect Leaky-Leaky, a useful repairer)
• 1 of HoseSnap to 16mm single straight connector (quick snap-on connection to regular garden hose)
• 1 of 16mm tee adaptor  (to allow quick snap-on connection to 2 lengths of supply pipe)

Each bed will get an additional set of: 

• 1 of 16-16-16 tee. (To branch supply pipe up behind your bed)
• 3 of 16 elbows (To bring supply pipe neatly over the wall of the raised bed)
• 1 of 16-12 reducer (To reduce pipe size to that of LeakyPipe)
• 1 of 12-12-12 tee (To branch LeakyPipe within the bed) 2 of 12 plugs (to seal the end of LeakyPipes)
• 1 of nail-in pipe clip (To keep supply pipe neatly in place on top of the retaining wall)

Imagine this.   Firstly, find a way of running the Supply tubing onto all the places you wish to water.  Use the Tee connection fittings and a pair of cutters, to tailor the tubing to give you a "Distribution Network" to carry the water to where you will be connecting the Leaky Pipe with the reducing connections.  Run the LeakyPipe near to the plants, - (within 30-50cm as the water will spread laterally) and plug the ends. (See this Video about fittings).

This is a great deal for raised borders, raised troughs or planters with a total area of up to 50m2. Kits includes push-fit connectors and options for Supply Pipe.

A comprehensive Kit to discreetly water up to 50m2 of raised beds or planters. Customise your kit by selecting sufficient connectors for 5-10 raised beds and choose between several options for supply pipe.

This kit includes lots of push-fit 'elbow' connectors to help fit an irrigation system to existing raised beds, borders, planters and troughs. You will need non-leaking supply pipe to carry the water up and over the wall of your bed. You can choose supply pipe to be included in your kit, or use small amounts of 1/2" garden hosepipe, which will also work with the connectors. Once at soil level, the pipe size 'reduces' down to that of LeakyPipe.  

The LeakyPipe can be laid on the surface or covered in mulch which helps water wicking away from the LeakyPipe. Arrange the LeakyPipe around your plants. Moisture spreads outwards for about 12 inches / 30cm either side. If you need to branch the LeakyPipe within the bed, 'tee' connectors are included, as are 'plugs' for the ends of LeakyPipe. A nail-in pipe clip keeps the pipe neatly in place on top of the wall of your raised bed / border. Lastly, a quick-connect hose-snap connector will allow connection to your garden hose.  

This Kit includes a 100m roll of LP12H LeakyPipe, which is designed to be ideal for general purpose watering, working up to 50metres from the barbed connections.  It has proven to last in excess of ten years.

How to customise your kit 

1. Select the number of raised beds you have
2. Select if you would like any supply pipe (size and length). The fittings will be adjusted to ensure they are compatible with your selection.
3. Double check the total area of your beds do not exceed 50m2 - this will ensure that 100m of LeakyPipe at 50cm spacing is sufficient for your beds.

Items included:

• 100m roll of LeakyPipe LP12H Porous Rubber Hose.
• 3 of 16-16-16 tees. (allows branching of the supply pipe network) 
• 2 of 16 elbows. (may be useful for supply network) 
• 4 of 16 plugs. (A tidy way of sealing supply pipe or garden hose). 
• 2 of 12-12 connectors.  (To connect Leaky-Leaky, a useful repairer).
• 1 of HoseSnap to 16mm single connector (quick snap-on connection to regular garden hose)

Each bed will get an additional set of:

• 1 of 16-16-16 tee. (To branch supply pipe up behind your bed)
• 3 of 16 elbows (To bring supply pipe neatly over the wall of the raised bed)
• 1 of 16-12 reducer (To reduce pipe size to that of LeakyPipe)
• 1 of 12-12-12 tee (To branch LeakyPipe within the bed)
• 2 of 12 plugs (to seal the end of LeakyPipes)
• 1 of nail-in pipe clip (To keep supply pipe neatly in place on top of the retaining wall)

Imagine this.   Firstly, find a way of running the Supply tubing onto all the places you wish to water.  Use the Tee connection fittings and a pair of cutters, to tailor the tubing to give you a "Distribution Network" to carry the water to where you will be connecting the Leaky Pipe with the reducing connections.  Run the LeakyPipe near to the plants, - (within 30-50cm as the water will spread laterally) and plug the ends. (See this Video about fittings).

A discounted kit for watering raised borders, raised troughs or planters with a total area of up to 50m2. Create a professional finish with all pipework concealed during construction of the beds. Kits are customisable for the number of raised beds and size of supply pipe.

A Kit created for landscape constructors to incorporate watering facilities during the construction of raised beds or planters. The Kits comprises professional leak-free compression fittings and sufficient LeakyPipe to irrigate up to 50m2 of raised beds, planters or troughs. 

This kit is designed to be installed at the construction stage of creating raised beds. The fittings allow water to be brought up inside the bed or planter via a 'riser' to the surface of the soil.  This gives a neat, clean professional look. The 'network' or supply pipe is best created with 20mm or 25mm blue MDPE pipe. The blue pipe isn't included in the kit, but a tee and elbow compression fittings are included to help you create the network. Once at soil level, an elbow fitting allows LeakyPipe to be laid on the surface or covered in mulch which helps water to wick away from the LeakyPipe. Arrange the LeakyPipe around the plants. Moisture spreads outwards for about 12 inches / 30cm either side. The free ends of the LeakyPipe are sealed with the included 'plugs'.  

In planning your system, think about how you want to create a network of supply pipe to carry water to each of the beds. 20mm or 25mm blue MDPE pipe is ideal for burying underground. MDPE pipe isn't included in this kit, but a tee and elbow compression fittings are included to help you create the network.  Also included is a fitting to connect to your water source - options here include a compression-3/4" adaptor to create a leak-free connection with the bottom of a timer or 3/4" tap thread OR a compression to HoseSnap fitting to allow quick hook-up to standard HoseSnap fittings on normal garden hosepipe. 

This Kit includes a 100m roll of LP12H LeakyPipe, which is designed to be ideal for general purpose watering, working up to 50metres from the barbed connections.  It has proven to last in excess of ten years.

How to customise your kit.

1. Select the number of raised beds you have
2. Select the supply pipe size you intend to use. The fittings will be adjusted to ensure they are compatible with your selection.
3. Choose a hook-up option, dependent on how you plan to feed water into the pipework.
4. Double check the total area of your beds do not exceed 50m2 - this will ensure that 50m of LeakyPipe at 50cm spacing is sufficient for your beds.

Items included:

• 100m roll of LeakyPipe LP12H Porous Rubber Hose.
• 1  of 20/25 compression to 3/4" female fitting OR 20/25 compression to HoseSnap fitting
• 1  of 20/25 compression tee.   (for branching of supply network)
• 1  of 20/25 compression elbow.  (for riser within terminal bed)
• 2  of 12-12 connectors.  (To connect Leaky-Leaky, a useful repairer).

Each bed will get an additional set of:

• 1 of 20/25 compression tee. (To branch supply pipe up as a riser within each bed)
• 1 of 20/25 compression elbow to LeakyPipe tee (To allow connection to 2 LeakyPipe lengths within each bed)
• 2 of 12 plugs (to seal the end of LeakyPipes)

Imagine this.   Firstly, find a way of running the Supply Pipe onto all the places you wish to water.  Use the compression fittings to tailor the pipe to give you a "Distribution Network" to carry the water to each raised bed.  Compression tee under each bed will allow creation of a 'riser' to bring the water to the surface of the soil.  Here you will be connecting the Leaky Pipes via the compression elbow.  Run the LeakyPipe near to the plants, - (within 30-50cm as the water will spread laterally) and plug the ends. (See this Video about fittings).

 

A discounted kit for watering raised borders, raised troughs or planters with a total area of up to 125sqm. Create a professional finish with all pipework concealed during construction of the beds. Kits are customisable for the number of raised beds and size of supply pipe. A Kit created for landscape constructors to incorporate watering facilities during the construction of raised beds or planters. The Kits comprises professional leak-free compression fittings and sufficient LeakyPipe to irrigate up to 125m2 of raised beds, planters or troughs.  This kit is designed to be installed at the construction stage of creating raised beds. The fittings allow water to be brought up inside the bed or planter via a 'riser' to the surface of the soil.  

This gives a neat, clean professional look. The 'network' or supply pipe is best created with 20mm or 25mm blue MDPE pipe. The blue pipe isn't included in the kit, but a tee and elbow compression fittings are included to help you create the network. Once at soil level, an elbow fitting allows LeakyPipe to be laid on the surface or covered in mulch which helps water to wick away from the LeakyPipe. Arrange the LeakyPipe around the plants. Moisture spreads outwards for about 12 inches / 30cm either side. The free ends of the LeakyPipe are sealed with the included 'plugs'.  

In planning your system, think about how you want to create a network of supply pipe to carry water to each of the beds. 20mm or 25mm blue MDPE pipe is ideal for burying underground. MDPE pipe isn't included in this kit, but a tee and elbow compression fittings are included to help you create the network.  Also included is a fitting to connect to your water source - options here include a compression-3/4" adaptor to create a leak-free connection with the bottom of a timer or 3/4" tap thread OR a compression to HoseSnap fitting to allow quick hook-up to standard HoseSnap fittings on normal garden hosepipe. 

This Kit includes a 250m roll of LP12H LeakyPipe, which is designed to be ideal for general purpose watering, working up to 50metres from the barbed connections.  It has proven to last in excess of ten years.

How to customise your kit.

1. Select the number of raised beds you have
2. Select the supply pipe size you intend to use. The fittings will be adjusted to ensure they are compatible with your selection.
3. Choose a hook-up option, dependent on how you plan to feed water into the pipework.
4. Double check the total area of your beds do not exceed 125m2 - this will ensure that 250m of LeakyPipe at 50cm spacing is sufficient for your beds.

Items included: 

• 250m roll of LeakyPipe LP12H Porous Rubber Hose.
• 1  of 20/25 compression to 3/4" female fitting OR 20/25 compression to HoseSnap fitting
• 2  of 20/25 compression tee.   (for branching of supply network)
• 2  of 20/25 compression elbow.  (for riser within terminal bed)
• 5  of 12-12 connectors.  (To connect Leaky-Leaky, a useful repairer).
  

Each bed will get an additional set of: 

• 1 of 20/25 compression tee. (To branch supply pipe up as a riser within each bed)
• 1 of 20/25 compression elbow to LeakyPipe tee (To allow connection to 2 LeakyPipe lengths within each bed)
• 2 of 12 plugs (to seal the end of LeakyPipes)

Imagine this.   Firstly, find a way of running the Supply Pipe onto all the places you wish to water.  Use the compression fittings to tailor the pipe to give you a "Distribution Network" to carry the water to each raised bed. Compression tee under each bed will allow creation of a 'riser' to bring the water to the surface of the soil.  Here you will be connecting the Leaky Pipes via the compression elbow.  Run the LeakyPipe near to the plants, - (within 30-50cm as the water will spread laterally) and plug the ends. (See this Video about fittings).


 

A Bargain, Discounted 100m Kit of The Original Leaky Pipe Porous Rubber Soaker Hose and Connectors.

Protect your investment in hedge plants with LeakyPipe® sub-surface watering hose. Recommended by Professional Landscape Contractors.

Get the Perfect Hedging with our Hedge Watering Kit

Specifically designed and made by us for assured watering, this 100m hedge watering kit includes the original LeakyPipe® LP12L porous rubber soaker hose and connectors. It carries water further and consistently applies it over 100m length, slowly. It enables you to efficiently water new and established hedging. This kit includes all the fittings for a quick hook-up to your garden hose.    Of course, you can also plumb this into many different supply pipes, as you want.  Just select the appropriate fittings from our "Connections" pages.

The many Advantage of LeakyPipe 100m Watering Kit 

- Ideal for watering in new hedging
- Fast establishment and growing-on
- Waters up to 100m length
- Simple push-fit plugs and fittings included
- Adaptable to your hedge layout - cut LeakyPipe with sharp scissors and use 'tee' fittings.
- Hosesnap connectors for easy connection to your garden hose.
- Made in the UK
- Lasts for many years

Put LeakyPipe on the soil near the stems of the hedge plants, plug the LeakyPipe ends, connect to your garden hose, see it work, then cover with mulch or hoe into the topsoil for best efficiency of watering.

Connectors include in this Hedge Watering Kit: 

- 1 of HoseSnap to straight connector. (For one LeakyPipe length).
- 1 of HoseSnap to tee connector. (For two lengths of LeakyPipe).
- 5 of 12mm end plugs.
- 5 of 12-12-12mm tees to be able to branch LeakyPipe.

Save your plants. Use 250m Kit of The Original Leaky Pipe® Porous Soaker Hose and Connectors. 

250m Hedge Watering Kit with Leaky Pipe LP12L and Connectors.

✔ Protect your investment in hedge plants with LeakyPipe® sub-surface watering hose
✔ Just lay on the soil, see it work, then cover with mulch or hoe into the topsoil. It will last for years
✔ Recommended by Professional Landscape Contractors

This 250m roll of LeakyPipe LP12L porous rubber hose kit with connectors is specifically manufactured by us to carry water further and water at a low rate, workin up to 100metres from the hose or supply pipe connection.

What's included in this Hedge Watering Kit?

This hedge watering kit has HoseSnap connectors for fast hook-up to your hose. Also some tees and plugs to allow you some connection options. All you need is a pair of sharp scissors to cut the leaky pipe and fit it to your hedge planting layout.

Ideal for watering in new hedge planting, ensuring rapid establishment and fast growing-on.

Connectors include:

- 2 of HoseSnap to straight connector (for one LeakyPipe® length); 
- 2 of HoseSnap to tee connector (for two lengths of leaky pipe);
- 10 of 12mm end plugs; To seal ends of LeakyPipe®
- 5 of 12-12-12mm tees to be able to branch the leaky pipe;
- 10 of 16-12 reducer connectors (in case you need to span pathways with hosepipe between leaky pipes)

For even more irrigation systems, discover our full range of Leaky Pipe Watering Kits!

How and where to use this Hedge Watering Kit?

Choose the Best in the Biggest roll and make your extensive hedge Grow Fast. A Discounted 400m Kit of The Original LeakyPipe® LP12L Porous Rubber Soaker Hose and Connectors.

400metre Hedge Watering Kit of Leaky Pipe and Connectors for the most water efficient and time effective technique.

✓ Specifically designed for the Landscape Trade to reliably water Hedging, Assure the best establishment and quick growth.   Get the best from your investment.

A 400metre roll of LeakyPipe® LP12L porous rubber hose with connectors. This hedge watering kit including an high quality leaky pipe & connectors is specifically manufactured by us to carry water further and water at a low rate.  This means you can work multiple 100metre lengths of LP12L at once.  Turn the water on and see 400metres of watering happening, with no more effort.      For best results, we designed this pipe for sub-surface installation, where it has proven to remain useful for well over 10years.    Just lay on the soil, see it work, then cover with mulch or hoe into the topsoil.     

Complete hedge watering kit including connectors.

This kit has HoseSnap connectors for fast hook-up to your hose. Also some tees and plugs to allow you some connection options. All you need is a pair of sharp scissors to cut the LeakyPipe and fit it to your hedge planting layout. Ideal for watering in new hedge planting, ensuring rapid establishment and fast growing-on.

Connectors include: 
- 3 of HoseSnap to straight connector (For one LeakyPipe length).
- 3 of HoseSnap to tee connector (For two lengths of LeakyPipe).
- 10 of 12mm end plugs.
- 5 of 12-12-12mm tees to be able to branch LeakyPipe
- 10 of 16-12 reducer connectors (in case you need to span pathways with hosepipe between LeakyPipes)
- 5 of 12-12 straight connectors for reconnecting LeakyPipe or repairing damage.

Do not hesitate to visit our Leaky Pipe Watering Kits section to discover our other models! 



Or this silent Video on the video tab about LeakyPipe layout in Gardens. 

A versatile kit allowing you to water 10 hanging baskets or patio pots.

A package containing 10 pressure-compensating button drippers, 10metres of fine "spaghetti" tube and 10 plastic stakes to retain the end of the tube, where you want the drips to fall from. The drippers are for insertion into sidewall of 16mm and 20mm black, LDPE polytubes (and some hosepipes).

The Spagetti tube is 4mm in diametre and is to discreetly carry the water from the output of the dripper to the hanging basket or patio pot. The stake is to retain the open end of the tube in position when working.  (Detach the stake and jam the pointy end back into the end of the tube, to make a temporary seal).

Proven to last and relieve you from the work of watering your plant collections, everywhere. A kit of 100m of LeakyPipe with a selection of 27 connectors including HoseSnap fittings for Planters, Beds and Borders.

Try the original 100m roll of LeakyPipe® Hose Pipe Kit

✔ Designed to water newly planted and established herbaceous borders.

This watering kit includes a superb porous hose which weeps water along its length.

This is a cost-effective leaky pipe irrigation system to water your garden borders. Includes 100m roll of LeakyPipe® with push-fit barbed connectors. Cut the LeakyPipe® LP12H into lengths as you lay it out and connect together to your hosepipe or 16mm black, Supply Pipe.    You can work the whole 100metres at one time, evenly.

A typical household tap pressure can water up to 300m LeakyPipe at one time. So you won't need the tap on much for all  100metres to work! This high quality rubber hose pipe will not perish or be affected by frost.

✔ It is reasonably flexible so you can snake it back and forth to water your borders, beds and shrubs.
✔ Specifically designed to easily water newly planted and established herbaceous borders, trees and hedgelines shorter than 100m.
✔ Includes connectors. Always in stock!
✔ It has proven to last in excess of ten years.

Buy a reliable hose pipe kit & Save time to water your plants. Arrange as rings or spiral around newly planted trees to aid their establishment. It works most efficiently when covered by a mulch or soil as evaporation is reduced. Overall you use less water with LeakyPipe than watering by hand and it will work out-of-sight whilst you enjoy your garden.

This hose pipe kit uses LP12H LeakyPipe

The LP12H is designed to be ideal for general purpose watering. This garden hose pipe is specifically manufactured by us to work on top of the ground, if you wish, as well as sub-mulch, working up to 50metres from the barbed connections. See video information here.

Buy this great quality hose pipe kit, which includes:

- 100 metres of LeakyPipe LP12H Porous Rubber Hose. This LeakyPipe® is not designed to used from a water butt, without pumping.
- 5  of 16-12 Reducer Connectors (Supply to LeakyPipe®).
- 5 of 16-12-16 Reducer Tees (Supply-Leaky®-Supply).
- 1  of 16-16-16 Tees (Supply-Supply-Supply).
- 2  of 12-12-12 Tees (To "Branch" LeakyPipe® to itself). 
- 10 of 12 plugs (A tidy way to plug LeakyPipe® ends).
- 2 of 16 plugs (A tidy way of sealing 16 supply pipe).
- 2 of 12-12 connectors (To connect Leaky-Leaky).
- 1 of Hosesnap-12 connector (Hose to Leaky®)
- 1 of Hosesnap-12tee connector (Hose to two Leakies)

N.B. 16 will fit both Supply piping and 1/2" garden hose, (even though the latter is a tight fit).  Also available in 50m, 100m, 250m, 400m rolls, with and without connections.

See this narrated video on system concepts and design.

Or the silent Video about LeakyPipe layout in Gardens on the next tab 

Trust the best Porous Hose, LeakyPipe®, in a Handy Kit for people with two hundred square metres of soft landscaping to water.  Buy this kit of 250m of LeakyPipe with all these connectors including HoseSnap fittings, tees and plugs to connect into your hosepipe. Especially for new & established planting in Beds and Borders.

250m of LeakyPipe and a variety of connectors to tailor a system to your own garden watering needs.  You can cut & use some of your own hosepipe with these fittings, or buy additional non-leaking polytube, "Supply" pipe.

This Kit comes with fittings that allow you to connect LeakyPipe® to either 20mm black polytube or to Garden Hose (and 16mm black polytube).  Choose from the "Supply Pipe Size" option box.

This Hose Pipe Kits is Perfect to Water a Medium Sized Garden

LeakyPipe is a porous hose which weeps water along its length. It will irrigate up to 50m as a single length, but here, the connector supplied will allow you to cut your roll appropriately, then connect two lengths of LeakyPipe to run at once.  

A standard household tap pressure can water up to 300m LeakyPipe at once. So you you should be able to make all of this work, "all at once"!     

It is reasonably flexible so you can snake it back and forth to water your borders, beds and shrubs. Arrange as rings or spiral around newly planted trees to aid their establishment. It works most efficiently when covered by a mulch or soil as evaporation is reduced.

Overall you use less water with LeakyPipe than watering by hand and it will work out-of-sight whilst you enjoy your garden. 

Connectors Included in the 250m Hose Pipe Kit:
- Two, HoseSnap-12 (LeakyPipe) straights.
- Two, HoseSnap to 12 (LeakyPipe) tees.
- Ten, Plugs for Leaky Pipe.
- Five, 16-12 or 20-12 (Hose to LeakyPipe) straights.
- Six, 16-12-16 or 20-12-20 Reducing Tees, (Hose to LeakyPipe).
- Five, 12-12-12equal tees (Leaky-Leaky).
- Four, 12-12 (LeakyPipe to LeakyPipe) connectors.

N.B. This pipe is not designed to used from a water butt, without pumping.   But it works really well with a timer!

See this short video about using connectors.


See this narrated video on system concepts and design.

Or the silent video about LeakyPipe layout in Gardens on the videos tab 

50m of LeakyPipe and connectors to water several rows of vegetables (including 5 isolation taps)

Grow your own Vegetable Plot with our 50m Watering Kit

Perfect for DIY watering of the fruit and vegetable plot, our watering system is a starter kit containing 50m of LeakyPipe® with a high leak rate (LP12UH) and all the connectors you're likely to need to lay out a watering system, specific to your own vegetable patch.

This irrigation system specially designed to water vegetable plots is really easy to use. Simply cut the LeakyPipe® hose to match the lengths of your rows with secateurs.

A complete Watering Kit for your Vegetable Plots

We've put together pipes and parts to supply you a great kit for efficiently watering these cropping areas. Our 50m vegetable plot watering kit contains enough connectors for 10 rows of vegetables, 5 of which can have isolation taps. It also includes end plugs and 'tee's' to branch the LeakyPipe®.

You will need to supply some garden hosepipe or 16mm supply polypipe to act as a non-leaking header pipe, from which the LeakyPipe® soaker hose branches off. Our porous rubber hoses are used sub-surface by UK Commercial Growers so they'll help you get great crops!

Connectors include:

• 1 of 16-16-16 equal Tee (to 'Tee' hosepipe and start making a header)
• 10 of 16-12-16 reducing Tee (to connect LeakyPIpe to the header)
• 2 of 16 plug (seals end of hosepipe manifold)
• 15 of 12 plugs (seals end of LeakyPipe)
• 5 of 12mm in-line taps (to isolate rows of LeakyPipe)
• 5 of 12-12-12 equal Tee (to branch LeakyPipe)
• 1 of HoseSnap to 16 straight (clip your hose to the manifold)

100m of LeakyPipe and connectors to water several rows of vegetables (including 10 isolation taps)

A 100m kit of LeakyPipe and a selection of connectors, including taps to isolate rows of vegetables. 

A starter kit containing 100m of LeakyPipe with a high leak rate (LP12UH) and all the connectors you're likely to need to lay out a watering system, specific to your own vegetable patch. Simply cut the LeakyPipe to match the lengths of your rows with secateurs. Contains enough connectors for 15 rows of vegetables, 10 of which can have isolation taps. Also includes end plugs and 'tee's' to branch the LeakyPipe. You will need to supply some garden hosepipe or 16mm supply polypipe to act as a non-leaking header pipe, from which the LeakyPipe branches off.

Connectors include:

• 3 of 16-16-16 equal Tee (to 'Tee' hosepipe and start making a header)
• 15 of 16-12-16 reducing Tee (to connect LeakyPIpe to the header)
• 4 of 16 plug (seals end of hosepipe manifold)
• 25 of 12 plugs (seals end of LeakyPipe)
• 10 of 12mm in-line taps (to isolate rows of LeakyPipe)
• 10 of 12-12-12 equal Tee (to branch LeakyPipe)
• 1 of HoseSnap - 16 Tee (to connect your hose to the manifold)
• 10 of short lengths of 12mm polytube for "traces" between 16-12-16 tees and 12taps

Add garden hose or 16mm black supply polypipe (LDPE) to these kits and make up an irrigation water distribution network to connect-up all the lengths of LeakyPipe you have laid in the Veg' rows.

50m roll of LeakyPipe® to extend Hedge Kits.

Especially designed porosity to water longer lengths of pipe.
Matches porosity of Hedge Watering LeakyPipe® LP12L

The Original Leaky Pipe Hedge Watering Porous Rubber Soaker Hose.

Specifically Designed and Made Here For The Assured Watering, Establishment and Fast Growing of Hedge Plantings and similar subjects.  

A 50metre roll of LeakyPipe® LP12L porous rubber hose. This LeakyPipe is specifically manufactured by us to carry water further and water at a low rate, working up to 100metres from the hose connection. Just lay on the soil, see it work, then cover with mulch or hoe into the topsoil. It will last for years. 

This roll is suitable for adding an additional 50m to your Hedge Watering Kit.  It has a lower watering rate than the standard LP12H pipe and shouldn't be used to extend 'normal leak' LeakyPipe.    You may wish to add some 12mm barbed fittings to your order.  

Ideal for watering in new hedge planting, ensuring rapid establishment and fast growing-on. Extend watering times to promote Saturation Conditions if required.

If your hedge branches or is an unusual shape, T connectors will allow the LeakyPipe to branch aswell to follow the route of your hedge. Lay it near the plants - within 30-50cm as the water will spread laterally. LeakyPipe works by wicking water into the soil it contacts and therefore works best if hoed into the topsoil or covered by mulch.

100m roll of LeakyPipe; LP12L to extend Hedge Kits.

Especially designed porosity to ensure slow, even watering further along lengths of LeakyPipe.  Matches porosity of Hedge Watering LeakyPipe® LP12L.

The Original Leaky Pipe® Hedge Watering Porous Rubber Soaker Hose.

Specifically Designed and Made Here For The Assured Watering, Establishment and Fast Growing of Hedge Plantings and similar, long-carry applications.  

A 100metre roll of LeakyPipe® LP12L porous rubber hose. This LeakyPipe® is specifically manufactured by us to carry water further and water at a low rate, working up to 100metres from the hose connection. Just lay on the soil, see it work, then cover with mulch or hoe into the topsoil. It is for Sub-surface installation where sweated water moves from its porous wall, upwards as well as outwards from the Pipe.   It will last for years.   We have installations in excess of twenty years

This roll is suitable for adding an additional 100m to your Hedge Watering Kit. It has a lower watering rate than the standard LP12H pipe and shouldn't be used to extend 'normal leak' LeakyPipe®.

Ideal for watering in new hedge planting, ensuring rapid establishment and fast growing-on.  Extend watering times to promote Saturation Conditions if required.

If your hedge branches or is an unusual shape, T connectors will allow the LeakyPipe® to branch as well to follow the route of your hedge. Lay it near the plants - within 30-50cm as the water will spread laterally.

Ever-Popular, Easy to use Battery-powered watering timer for taps.
Single output.  

Automatically water your garden while you are on holiday with a simple, reliable tap timer.

Be More Efficient using our Automated Tap Timer

With a big dial to programme your watering times, this is just about the simplest timer available at a very cheap price. Two good quality alkaline AA batteries will keep this unit running unattended all summer. 

Features:

• Simple connection to your tap (3/4" thread). 
• 3/4" thread output (suitable for hose snap or compression fittings). 
• Programmable by watering duration, time of day and day of week (eg twice per week)
  
• Manual bypass for easy tap use.
• Rain delay for water conservation. 
• Dimensions   170mm Ht * 130mm W * 60mm D
  

Please bring this unit inside over winter to protect from frost damage. 

Versatile, Battery-powered timer for taps.
Connects to one tap and has Two outputs, both individually programmable.

Automatically water your garden while you are on holiday with a simple, reliable tap timer.

There's no easier way of getting two areas automatically watered from one water source at such a cheap price.  Simply take the fitting off your tap, exposing the male thread of your tap. (Please note that this has to be a 3/4" BSP thread, normally found on any, modern Garden Tap); Then screw on the Buddy2 timer.  

The two outputs of the timer can be programmed to give you differing watering times. Just attach your output fitting to those outputs and then run your piping/hose from here to the LeakyPipe, drippers or sprinklers that you've chosen to use.

Brilliantly reliable & easy to use, but do take them indoors during the Winter!

With a big dial to programme your watering times, this is just about the simplest timer available at a very cheap price. Two good quality alkaline AA batteries will keep this unit running unattended all summer.

Features:

• Simple connection to your tap (3/4" thread).
• 3/4" thread output (suitable for hose snap or compression fittings).
• Programmable by watering duration, time of day and day of week (eg twice per week)
• Manual bypass for easy tap use.
• Rain delay for water conservation.
• Dimensions.  170mm Ht * 170mm W * 60mm D

Please bring this timer inside over winter to protect from frost damage.

For outdoor use with cold water only.