250m Roll of Leaky Pipe Porous Rubber Soaker Hose (LP12H)

The Best Quality 250m Porous Hose Pipe Available in the UK.

We manufacture LeakyPipe irrigation systems to Ensure High Standards.

LP12H General Purpose LeakyPipe is a porous hose which weeps water along its length. It will irrigate 50m lengths of pipe, although several lengths can be watered at once. A standard household tap pressure can water up to 300m LeakyPipe at once. It will not perish or be affected by frost. It is reasonably flexible so you can snake it back and forth to water your borders, beds and shrubs. Arrange as rings or spiral around newly planted trees to aid their establishment. It works most efficiently when covered by a mulch or soil as evaporation is reduced. Overall you use less water with Leaky Pipe systems than watering by hand and it will work out-of-sight whilst you enjoy your garden.

250m long porous hose pipe for optimal garden irrigation

Available in 50m, 100m, 250m, 450m rolls.

400m Roll of Leaky Pipe Porous Rubber Soaker Hose (LP12H)

High quality 400m long porous hose pipe available in the UK. 

We manufacture LeakyPipe to ensure high standards.

LP12H General Purpose LeakyPipe is a porous garden hose which weeps water along its length. It will irrigate 50m lengths of pipe, although several lengths can be watered at once. A standard household tap pressure can water up to 300m LeakyPipe at once. It will not perish or be affected by frost. It is reasonably flexible so you can snake it back and forth to water your borders, beds and shrubs. Arrange as rings or spiral around newly planted trees to aid their establishment. It works most efficiently when covered by a mulch or soil as evaporation is reduced. Overall you use less water with LeakyPipe than watering by hand and it will work out-of-sight whilst you enjoy your garden.

The Original 400m porous hose pipe by Leaky Pipe

Soaker hose also available in 50m, 100m, 250m, 400m rolls.

Protect your investment in time and money on plants. Get them Growing Fast with this Great Deal for 400metres of LeakyPipe; Porous Hose, Connections, SupplyPipe, Timer with Pressure Regulators. A complete package to save plant life now!

This 400metre combo kit is tailored for an application that may use 300-700metres of leaky pipe. So there is scope to add more later, should you wish. This garden porous hose kit uses LP12H leaky pipe, which is designed to be ideal for general purpose watering.       

This LeakyPipe all-inclusive combination kit is specifically manufactured by us to work on top of the ground, if you wish, as well as sub-mulch or sub-soil working up to 50metres from the barbed connections. It has proven to last in excess of ten years.

Leaky Pipe's garden porous hose kit is ideal for watering beds and borders, planters, trees and hedgelines (up to 50metres long), lawn and plants. There is a 20mm supply pipe for good, efficient water movement and less pressure drop through your distribution network. Moreover, we have put pressure regulators on the Buddy2 zone timer for you, to ensure the system does not get over-pressurised.  

Items included:

- 400 metres of leaky pipe LP12H porous rubber hose;
- 100 metres of 20mm black supply pipe;
- 1 of Buddy2 Timer for tap connection; (Assembled with two pressure regulators & two 20mm Compression Fittings)
- 5 of 20-12 Reducer Connectors. (Supply to LeakyPipe);
- 20 of 20-12-20 Reducer Tees (Supply-Leaky-Supply);
- 3 of 20-20-20 Tees.  (Supply-Supply-Supply);
- 5 of 12-12-12 Tees.  (To "Branch" leaky pipe to itself);
- 20 of 12 plugs.  (A tidy way to plug leaky pipe ends);
- 2 of 20 plugs.   (A tidy way of sealing 20mm supply pipe);
- 5 of 12-12 connectors.  (To connect/repair Leaky-Leaky).
- 2 of 20-16 connectors (connect Supply Pipe to your hosepipe if you wish)

Variety of lengths available to fit a wide range of hoses. Please note that the garden hose reel is not included. You may also be interested in discovering our full range of Leaky Pipe Watering Kits & Leaky Pipe Porous Hoses.

How to use Leaky Pipe's all-inclusive Garden Hose Kit?

Choose the Best in the Biggest roll and make your extensive hedge Grow Fast. A Discounted 400m Kit of The Original LeakyPipe® LP12L Porous Rubber Soaker Hose and Connectors.

400metre Hedge Watering Kit of Leaky Pipe and Connectors for the most water efficient and time effective technique.

✓ Specifically designed for the Landscape Trade to reliably water Hedging, Assure the best establishment and quick growth.   Get the best from your investment.

A 400metre roll of LeakyPipe® LP12L porous rubber hose with connectors. This hedge watering kit including an high quality leaky pipe & connectors is specifically manufactured by us to carry water further and water at a low rate.  This means you can work multiple 100metre lengths of LP12L at once.  Turn the water on and see 400metres of watering happening, with no more effort.      For best results, we designed this pipe for sub-surface installation, where it has proven to remain useful for well over 10years.    Just lay on the soil, see it work, then cover with mulch or hoe into the topsoil.     

Complete hedge watering kit including connectors.

This kit has HoseSnap connectors for fast hook-up to your hose. Also some tees and plugs to allow you some connection options. All you need is a pair of sharp scissors to cut the LeakyPipe and fit it to your hedge planting layout. Ideal for watering in new hedge planting, ensuring rapid establishment and fast growing-on.

Connectors include: 
- 3 of HoseSnap to straight connector (For one LeakyPipe length).
- 3 of HoseSnap to tee connector (For two lengths of LeakyPipe).
- 10 of 12mm end plugs.
- 5 of 12-12-12mm tees to be able to branch LeakyPipe
- 10 of 16-12 reducer connectors (in case you need to span pathways with hosepipe between LeakyPipes)
- 5 of 12-12 straight connectors for reconnecting LeakyPipe or repairing damage.

Do not hesitate to visit our Leaky Pipe Watering Kits section to discover our other models! 



Or this silent Video on the video tab about LeakyPipe layout in Gardens. 

A discounted kit for watering raised borders, raised troughs or planters with a total area of up to 50m2. Create a professional finish with all pipework concealed during construction of the beds. Kits are customisable for the number of raised beds and size of supply pipe.

A Kit created for landscape constructors to incorporate watering facilities during the construction of raised beds or planters. The Kits comprises professional leak-free compression fittings and sufficient LeakyPipe to irrigate up to 50m2 of raised beds, planters or troughs. 

This kit is designed to be installed at the construction stage of creating raised beds. The fittings allow water to be brought up inside the bed or planter via a 'riser' to the surface of the soil.  This gives a neat, clean professional look. The 'network' or supply pipe is best created with 20mm or 25mm blue MDPE pipe. The blue pipe isn't included in the kit, but a tee and elbow compression fittings are included to help you create the network. Once at soil level, an elbow fitting allows LeakyPipe to be laid on the surface or covered in mulch which helps water to wick away from the LeakyPipe. Arrange the LeakyPipe around the plants. Moisture spreads outwards for about 12 inches / 30cm either side. The free ends of the LeakyPipe are sealed with the included 'plugs'.  

In planning your system, think about how you want to create a network of supply pipe to carry water to each of the beds. 20mm or 25mm blue MDPE pipe is ideal for burying underground. MDPE pipe isn't included in this kit, but a tee and elbow compression fittings are included to help you create the network.  Also included is a fitting to connect to your water source - options here include a compression-3/4" adaptor to create a leak-free connection with the bottom of a timer or 3/4" tap thread OR a compression to HoseSnap fitting to allow quick hook-up to standard HoseSnap fittings on normal garden hosepipe. 

This Kit includes a 100m roll of LP12H LeakyPipe, which is designed to be ideal for general purpose watering, working up to 50metres from the barbed connections.  It has proven to last in excess of ten years.

How to customise your kit.

1. Select the number of raised beds you have
2. Select the supply pipe size you intend to use. The fittings will be adjusted to ensure they are compatible with your selection.
3. Choose a hook-up option, dependent on how you plan to feed water into the pipework.
4. Double check the total area of your beds do not exceed 50m2 - this will ensure that 50m of LeakyPipe at 50cm spacing is sufficient for your beds.

Items included:

• 100m roll of LeakyPipe LP12H Porous Rubber Hose.
• 1  of 20/25 compression to 3/4" female fitting OR 20/25 compression to HoseSnap fitting
• 1  of 20/25 compression tee.   (for branching of supply network)
• 1  of 20/25 compression elbow.  (for riser within terminal bed)
• 2  of 12-12 connectors.  (To connect Leaky-Leaky, a useful repairer).

Each bed will get an additional set of:

• 1 of 20/25 compression tee. (To branch supply pipe up as a riser within each bed)
• 1 of 20/25 compression elbow to LeakyPipe tee (To allow connection to 2 LeakyPipe lengths within each bed)
• 2 of 12 plugs (to seal the end of LeakyPipes)

Imagine this.   Firstly, find a way of running the Supply Pipe onto all the places you wish to water.  Use the compression fittings to tailor the pipe to give you a "Distribution Network" to carry the water to each raised bed.  Compression tee under each bed will allow creation of a 'riser' to bring the water to the surface of the soil.  Here you will be connecting the Leaky Pipes via the compression elbow.  Run the LeakyPipe near to the plants, - (within 30-50cm as the water will spread laterally) and plug the ends. (See this Video about fittings).

 

A discounted kit for watering raised borders, raised troughs or planters with a total area of up to 125sqm. Create a professional finish with all pipework concealed during construction of the beds. Kits are customisable for the number of raised beds and size of supply pipe. A Kit created for landscape constructors to incorporate watering facilities during the construction of raised beds or planters. The Kits comprises professional leak-free compression fittings and sufficient LeakyPipe to irrigate up to 125m2 of raised beds, planters or troughs.  This kit is designed to be installed at the construction stage of creating raised beds. The fittings allow water to be brought up inside the bed or planter via a 'riser' to the surface of the soil.  

This gives a neat, clean professional look. The 'network' or supply pipe is best created with 20mm or 25mm blue MDPE pipe. The blue pipe isn't included in the kit, but a tee and elbow compression fittings are included to help you create the network. Once at soil level, an elbow fitting allows LeakyPipe to be laid on the surface or covered in mulch which helps water to wick away from the LeakyPipe. Arrange the LeakyPipe around the plants. Moisture spreads outwards for about 12 inches / 30cm either side. The free ends of the LeakyPipe are sealed with the included 'plugs'.  

In planning your system, think about how you want to create a network of supply pipe to carry water to each of the beds. 20mm or 25mm blue MDPE pipe is ideal for burying underground. MDPE pipe isn't included in this kit, but a tee and elbow compression fittings are included to help you create the network.  Also included is a fitting to connect to your water source - options here include a compression-3/4" adaptor to create a leak-free connection with the bottom of a timer or 3/4" tap thread OR a compression to HoseSnap fitting to allow quick hook-up to standard HoseSnap fittings on normal garden hosepipe. 

This Kit includes a 250m roll of LP12H LeakyPipe, which is designed to be ideal for general purpose watering, working up to 50metres from the barbed connections.  It has proven to last in excess of ten years.

How to customise your kit.

1. Select the number of raised beds you have
2. Select the supply pipe size you intend to use. The fittings will be adjusted to ensure they are compatible with your selection.
3. Choose a hook-up option, dependent on how you plan to feed water into the pipework.
4. Double check the total area of your beds do not exceed 125m2 - this will ensure that 250m of LeakyPipe at 50cm spacing is sufficient for your beds.

Items included: 

• 250m roll of LeakyPipe LP12H Porous Rubber Hose.
• 1  of 20/25 compression to 3/4" female fitting OR 20/25 compression to HoseSnap fitting
• 2  of 20/25 compression tee.   (for branching of supply network)
• 2  of 20/25 compression elbow.  (for riser within terminal bed)
• 5  of 12-12 connectors.  (To connect Leaky-Leaky, a useful repairer).
  

Each bed will get an additional set of: 

• 1 of 20/25 compression tee. (To branch supply pipe up as a riser within each bed)
• 1 of 20/25 compression elbow to LeakyPipe tee (To allow connection to 2 LeakyPipe lengths within each bed)
• 2 of 12 plugs (to seal the end of LeakyPipes)

Imagine this.   Firstly, find a way of running the Supply Pipe onto all the places you wish to water.  Use the compression fittings to tailor the pipe to give you a "Distribution Network" to carry the water to each raised bed. Compression tee under each bed will allow creation of a 'riser' to bring the water to the surface of the soil.  Here you will be connecting the Leaky Pipes via the compression elbow.  Run the LeakyPipe near to the plants, - (within 30-50cm as the water will spread laterally) and plug the ends. (See this Video about fittings).


 

Ingenious, time saving, Travelling Lawn Sprinkler by Nelson

Self-propelled, Travelling Sprinkler System for large gardens and areas of grass.

Made by Nelson. Improved by us.

This is a great tool made in the USA by Nelson. It's useful to those who have a large area of lawn & desire an easy and cheap way of watering it without too much effort. Look no further! It's a garden sprinkler that moves itself.

Tap for 20mm supply pipe

A simple tap which allows isolation of areas from your irrigation system. Sold as single unit.

Available in 3 sizes as shown:

• 12mm - fits LeakyPipe®
• 16mm - fits 16mm polytube or garden hosepipe
• 20mm - fits 20mm polytube

These taps allow areas of your watering system to be switched on or off as required. 12mm size allows a section of LeakyPipe to be turned off e.g. a row on a vegetable patch. 16mm or 20mm allow a whole section or your irrigation system to be shut down e.g. a particular border awaiting planting. They have a barbed push-fit connection and clips are not needed. 

Please note these are NOT designed to hold back full (static) mains pressure

Pack of 9 fittings to bring water up and over the sides of existing raised beds, planters or troughs.

Pack of tee's and elbow's which brings water into an existing raised bed.

Simple push-fit connectors allow customisation around walls of different heights and widths.

A pack of push-fit connectors which allows creation of a non-leaking 'riser' to bring water up and over the sides of your existing raised beds. Once in the bed, the pipe size 'reduces' down to that of LeakyPipe. The LeakyPipe is laid amongst your plants on the surface of the soil or under a shallow layer of mulch/soil.  A LeakyPipe 'tee' permits branching of the LeakyPipe and 2 end plugs are also included. Lastly a nail-in pipe-clip keeps the supply pipe neat on top of the wall of your raised bed.

Choose either size 16mm or 20mm supply pipe. 16mm connectors will also fit 1/2" Garden Hosepipe. 

Fittings included:

• One Equal Tee (size 16/20) allows branching to the supply pipe to create a 'riser'
• Three Equal Elbows (size 16/20) allows the supply pipe to be fashioned neatly over the side of the raised bed 
• One supply pipe (size 16/20) -12 reducer, Reduces pipe size from supply size to LeakyPipe size.
• One 12-12-12 tee, (allows branching of LeakyPipe in T shape).
• Two 12 end plugs (for sealing the LeakyPipe ends).
• One nail-in pipe-clip (size compatible with your chosen supply pipe size)
  

Pack of compression fittings to create 'risers' to bring water up inside raised beds, planters, troughs or containers. Designed for use at the construction stage of building raised beds to create a neat look without pipes showing. Suitable for professional use in shared space communal areas or home domestic modern gardens. Compression fittings create reliable secure leak-free connections in areas that are difficult to access at a later date for maintenance. Compression fittings are compatible with blue 'mains' MDPE pipe or black LDPE pipe.

During construction, a 'riser' is created within the raised bed. At the soil surface, the compression elbow fitting will bring the pipe work level with the soil surface and allow connection to 2 lengths of LeakyPipe with simple push-fit barbed fittings. The LeakyPipe is laid amongst your plants on the surface of the soil or under a shallow layer of mulch/soil.  The LeakyPipe ends are sealed with the included plugs.  Overall this gives a neat look as the riser pipe and LeakyPipes will get covered by soil and not be visible.

Compression fittings are ideal for use in situations that would be difficult to access for maintenance at a later date.  These are great quality compression fittings and are the ones we choose to use ourselves, owing to their reliability.

Options include size 20mm or 25mm supply pipe.  Choose which size you would like and all connectors will automatically be swopped to your chosen size.

• One 20 or 25 compression Tee.  (allows branching to the supply pipe to create a 'riser')
• One 20 or 25 compression elbow to 12 barbed connector (allows connection to 2 lengths of LeakyPipe)
• Two 12 end plugs (for sealing the LeakyPipe ends).

Filter and Pressure Reducing Valve Set.

(Filter cartridge and brass connectors included)

A pre-assembled filter and pressure regulator kit with options of input / output fittings.

This kit is ideal if your water source is unclean e.g. borehole and the pressure either too high or erratic.  The unit is preassembled and you just need to connect it into your system, using either brass 'snap' fittings, 16mm or 20mm compression fittings, depending on the non-porous supply pipe you are using. Water goes through filter first, then the pressure reducing valve.

Includes a 10" long pleated filter which can easily be removed for cleaning or replacement. A commercial grade filter which filters down to 22micron.

Make sure it stays free of frost, so drain it out for overwintering.

Includes bracket to mount the unit on a wall or fence (fixings not provided) and spanner to tighten the body of the filter onto its top.

Adjustable Pressure Regulator

An adjustable pressure reducing valve.

An Adjustable Pressure Regulator is a device that will adjust itself to allow a suitable downstream pressure in your pipework/Leaky Pipe. It will do this automatically as the input pressure may vary.      It has a 3/4" female input and a 3/4" male output.

Adjust the downstream pressure between 0.7-2.3Bar with a Flat Screwdriver.

20mm Compression to 3/4" female Threaded Adaptor.
Sold Individually

Try our Reliable 3/4 Female AdaptorThere is no more secure way of quickly attaching 20mm supply pipe to a male thread (like the one you'll find on the output of a watering timer or tap) than with this fitting. 

No fancy tools needed to fit this adaptor! SOLD INDIVIDUALLY

Hozelock-type fitting which allows easy make / break connections with 20mm supply polypipe.

These clip on/off connectors are familiar to most gardeners and are the simplest way of bringing your water supply to the LeakyPipe network you have laid out. It connects to the non-leaking supply polypipe which links your system together.  Easily connect your hosepipe to the LeakyPipe system when you want to water, and disconnect it when you want to use your hose for something else.

Choose the number of outputs you would like; 

• Straight - connects to one 20mm supply pipe
• Tee - connects to two 20mm supply pipes.
  

SOLD INDIVIDUALLY

20mm Compression to LeakyPipe® connector
(To one or two lengths of Leaky Pipe options)

Connect one or two LeakyPipe lines  into a length of 20mm blue MDPE 'mains' pipe 

Use these fittings where the water is supplied to the garden in 20mm blue MDPE 'mains' pipe. The output end is a barbed fitting which simply pushes onto the LeakyPipe. See our video help on using compression fittings.

The following outputs are available.

12 - fits LeakyPipe as single or double output
16 - fits 16mm polytube as single or double output
20 - fits 20mm polytube as single or double output

Sold as a single unit, pre-assembled with PTFE tape. The fitting can be rotated once assembled without breaking the seal

20mm Compression Tee Fitting with 16mm barbed connection to LDPE black polytube. (1, 2 output options)

Tee into a line of 20mm blue 'mains' MDPE pipe to one or two 16mm black polytube "supply” pipes.   Just select which you need.

Use these compression fittings where the water is supplied to the garden in 20mm blue MDPE 'mains' pipe. The output end is a barbed fitting which simply pushes onto the 16mm black LDPE polytube, that will carry the water further into your system.. 

Available with one or two outputs - select from the menu above.
Sold as a single unit, pre-assembled with PTFE tape. The fitting can be rotated once assembled without breaking the seal.

The following outputs are also available.

12 - fits LeakyPipe as single or double output
16 - fits 16mm polytube as single or double output
20 - fits 20mm polytube as single or double output

High Quality Unidelta brand
 

20mm Compression to 20mm barbed connector (1 or 2 output options)

Connect 20mm blue 'mains' pipe to 1 or 2 outputs of 20mm "supply" LDPE black polypipe.

Use these fittings where the water is supplied to the garden in 20mm blue MDPE 'mains' pipe. The output end is a barbed fitting which simply pushes onto 20mm supply polypipe.

The following outputs are available:

12 - fits LeakyPipe as single or double output
16 - fits 16mm polytube as single or double output
20 - fits 20mm polytube as single or double output

Sold as a single unit, pre-assembled with PTFE tape. The fitting can be rotated once assembled without breaking the seal.

To connect 20mm supply LDPE polypipe direct to 20mm "BLUE" MDPE polytubes.  A very positive connection.

20mm Compression Tee

20mm Compression Tee for permanent, secure, leak-free connections in 20mm black LDPE supply polypipe and blue MDPE pipe

20mm Compression Tee for permanent, secure, leak-free connections in 20mm black LDPE supply polypipe and blue MDPE pipe

20mm Compression Fitting with connections for LeakyPipe LP12 range.

(One or Two output options available for attaching one or two LeakyPipes)

Connect 20mm blue 'mains' MDPE pipe, to One output to LeakyPipe.   Also works with 20mm LDPE Black polytube instead of Blue MDPE tube.

Use these compression fittings where the water is supplied to the garden in 20mm blue MDPE 'mains' pipe. The output end is a barbed fitting which simply pushes onto the LeakyPipe.

Available for one or two LeakyPipe outputs - select from the "Outputs" option box above.

Sold as a single unit, pre-assembled with PTFE tape. The fitting can be rotated once assembled without breaking the seal.  High Quality Unidelta brand

Larger outputs are also available.
16 - fits 16mm polytube as single or double output.  CLICK HERE
20 - fits 20mm polytube as single or double output.  CLICK HERE

20mm Compression Elbow to LeakyPipe connector.
(1 or 2 output options)

Connect 20mm blue 'mains' pipe to One or Two outputs of LeakyPipe.

Use these fittings where the water is supplied to the garden in 20mm blue MDPE 'mains' pipe. The compression fitting is elbowed so that outputs are at 90degrees, very useful when the blue pipe is vertical as a 'riser' pipe. The output end is a barbed fitting which simply pushes onto the LeakyPipe.

The following outputs are available:

12 - fits LeakyPipe as single or double output
16 - fits 16mm polytube as single or double output
20 - fits 20mm polytube as single or double output

Sold as a single unit, pre-assembled with PTFE tape. The fitting can be rotated once assembled without breaking the seal.