Ever-Popular, Easy to use Battery-powered watering timer for taps.
Single output.  

Automatically water your garden while you are on holiday with a simple, reliable tap timer.

Be More Efficient using our Automated Tap Timer

With a big dial to programme your watering times, this is just about the simplest timer available at a very cheap price. Two good quality alkaline AA batteries will keep this unit running unattended all summer. 

Features:

• Simple connection to your tap (3/4" thread). 
• 3/4" thread output (suitable for hose snap or compression fittings). 
• Programmable by watering duration, time of day and day of week (eg twice per week)
  
• Manual bypass for easy tap use.
• Rain delay for water conservation. 
• Dimensions   170mm Ht * 130mm W * 60mm D
  

Please bring this unit inside over winter to protect from frost damage. 

250m Roll of Leaky Pipe Porous Rubber Soaker Hose (LP12H)

The Best Quality 250m Porous Hose Pipe Available in the UK.

We manufacture LeakyPipe irrigation systems to Ensure High Standards.

LP12H General Purpose LeakyPipe is a porous hose which weeps water along its length. It will irrigate 50m lengths of pipe, although several lengths can be watered at once. A standard household tap pressure can water up to 300m LeakyPipe at once. It will not perish or be affected by frost. It is reasonably flexible so you can snake it back and forth to water your borders, beds and shrubs. Arrange as rings or spiral around newly planted trees to aid their establishment. It works most efficiently when covered by a mulch or soil as evaporation is reduced. Overall you use less water with Leaky Pipe systems than watering by hand and it will work out-of-sight whilst you enjoy your garden.

250m long porous hose pipe for optimal garden irrigation

Available in 50m, 100m, 250m, 450m rolls.

400m Roll of Leaky Pipe Porous Rubber Soaker Hose (LP12H)

High quality 400m long porous hose pipe available in the UK. 

We manufacture LeakyPipe to ensure high standards.

LP12H General Purpose LeakyPipe is a porous garden hose which weeps water along its length. It will irrigate 50m lengths of pipe, although several lengths can be watered at once. A standard household tap pressure can water up to 300m LeakyPipe at once. It will not perish or be affected by frost. It is reasonably flexible so you can snake it back and forth to water your borders, beds and shrubs. Arrange as rings or spiral around newly planted trees to aid their establishment. It works most efficiently when covered by a mulch or soil as evaporation is reduced. Overall you use less water with LeakyPipe than watering by hand and it will work out-of-sight whilst you enjoy your garden.

The Original 400m porous hose pipe by Leaky Pipe

Soaker hose also available in 50m, 100m, 250m, 400m rolls.

Submergible valve boxes to conceal control equipment. (Not recommended for battery-powered, timers for taps).

Available in Standard and Jumbo size.

Larger sized submergible boxes, large enough to conceal filters and control assemblies.

These valve boxes are designed to be dug into the ground and have green bolt-down lids. They will protect and conceal underground control equipment. PLEASE do NOT place battery timers within these valve boxes as they can get damp & fail.

Available in the following sizes:

• Standard - 25cm wide, 46cm long, 30cm deep
• Jumbo - 46cm wide, 63cm long, 30cm deep

A standard-sized rectangular valve box with green bolt-down lid.

Size: 25cm wide, 46cm long, 30cm deep.

These submergible valve boxes are designed to be dug into the ground and have green twist down lids. They will protect and conceal underground pipes, valves and control equipment. 

PLEASE do NOT place battery timers within these valve boxes as they can get damp.

They are available in following sizes:

• Small, round - 20cm diameter, 23cm deep
• Large, round - 33cm diameter, 25cm deep

100m of LeakyPipe and connectors to water several rows of vegetables (including 10 isolation taps)

A 100m kit of LeakyPipe and a selection of connectors, including taps to isolate rows of vegetables. 

A starter kit containing 100m of LeakyPipe with a high leak rate (LP12UH) and all the connectors you're likely to need to lay out a watering system, specific to your own vegetable patch. Simply cut the LeakyPipe to match the lengths of your rows with secateurs. Contains enough connectors for 15 rows of vegetables, 10 of which can have isolation taps. Also includes end plugs and 'tee's' to branch the LeakyPipe. You will need to supply some garden hosepipe or 16mm supply polypipe to act as a non-leaking header pipe, from which the LeakyPipe branches off.

Connectors include:

• 3 of 16-16-16 equal Tee (to 'Tee' hosepipe and start making a header)
• 15 of 16-12-16 reducing Tee (to connect LeakyPIpe to the header)
• 4 of 16 plug (seals end of hosepipe manifold)
• 25 of 12 plugs (seals end of LeakyPipe)
• 10 of 12mm in-line taps (to isolate rows of LeakyPipe)
• 10 of 12-12-12 equal Tee (to branch LeakyPipe)
• 1 of HoseSnap - 16 Tee (to connect your hose to the manifold)
• 10 of short lengths of 12mm polytube for "traces" between 16-12-16 tees and 12taps

Add garden hose or 16mm black supply polypipe (LDPE) to these kits and make up an irrigation water distribution network to connect-up all the lengths of LeakyPipe you have laid in the Veg' rows.

50m of LeakyPipe and connectors to water several rows of vegetables (including 5 isolation taps)

Grow your own Vegetable Plot with our 50m Watering Kit

Perfect for DIY watering of the fruit and vegetable plot, our watering system is a starter kit containing 50m of LeakyPipe® with a high leak rate (LP12UH) and all the connectors you're likely to need to lay out a watering system, specific to your own vegetable patch.

This irrigation system specially designed to water vegetable plots is really easy to use. Simply cut the LeakyPipe® hose to match the lengths of your rows with secateurs.

A complete Watering Kit for your Vegetable Plots

We've put together pipes and parts to supply you a great kit for efficiently watering these cropping areas. Our 50m vegetable plot watering kit contains enough connectors for 10 rows of vegetables, 5 of which can have isolation taps. It also includes end plugs and 'tee's' to branch the LeakyPipe®.

You will need to supply some garden hosepipe or 16mm supply polypipe to act as a non-leaking header pipe, from which the LeakyPipe® soaker hose branches off. Our porous rubber hoses are used sub-surface by UK Commercial Growers so they'll help you get great crops!

Connectors include:

• 1 of 16-16-16 equal Tee (to 'Tee' hosepipe and start making a header)
• 10 of 16-12-16 reducing Tee (to connect LeakyPIpe to the header)
• 2 of 16 plug (seals end of hosepipe manifold)
• 15 of 12 plugs (seals end of LeakyPipe)
• 5 of 12mm in-line taps (to isolate rows of LeakyPipe)
• 5 of 12-12-12 equal Tee (to branch LeakyPipe)
• 1 of HoseSnap to 16 straight (clip your hose to the manifold)

This is a great deal for 50metres of LeakyPipe, Connections and SupplyPipe.

Ideal for raised garden beds, raised borders, raised troughs or planters.

A comprehensive Kit to discreetly water up to 25m2 of raised beds or planters. Customise your kit by selecting sufficient connectors for 2-6 raised beds and choose between several options for supply pipe.

This kit includes lots of push-fit 'elbow' connectors to help fit an irrigation system to existing raised beds, borders, planters and troughs. You will need non-leaking supply pipe to carry the water up and over the wall of your bed. You can choose supply pipe to be included in your kit, or use small amounts of 1/2" garden hosepipe, which will also work with the connectors. Once at soil level, the pipe size 'reduces' down to that of LeakyPipe.  The LeakyPipe can be laid on the surface or covered in mulch which helps water wicking away from the LeakyPipe. Arrange the LeakyPipe around your plants. Moisture spreads outwards for about 12 inches / 30cm either side. If you need to branch the LeakyPipe within the bed, 'tee' connectors are included, as are 'plugs' for the ends of LeakyPipe.

A nail-in pipe clip keeps the pipe neatly in place on top of the wall of your raised bed / border. Lastly, a quick-connect hose-snap connector will allow connection to your garden hose.  

This Kit includes 50m roll of LP12H LeakyPipe, which is designed to be ideal for general purpose watering, working up to 50metres from the barbed connections.  It has proven to last in excess of ten years.

How to customise your kit 

1. Select the number of raised beds you have
2. Select if you would like any supply pipe (size and length). The fittings will be adjusted to ensure they are compatible with your selection.
3. Double check the total area of your beds do not exceed 25m2 - this will ensure that 50m of LeakyPipe at 50cm spacing is sufficient for your beds.

Items included:

• 50m roll of LeakyPipe LP12H Porous Rubber Hose
• 1 of 16-16-16 Tee.  (Allows branching of your supply network)
• 2 of 16 plugs.   (A tidy way of sealing supply pipe or garden hose)
• 2 of 12-12 connectors.  (To connect Leaky-Leaky, a useful repairer)
• 1 of HoseSnap to 16mm single straight connector (quick snap-on connection to regular garden hose)
• 1 of 16mm tee adaptor  (to allow quick snap-on connection to 2 lengths of supply pipe)

Each bed will get an additional set of: 

• 1 of 16-16-16 tee. (To branch supply pipe up behind your bed)
• 3 of 16 elbows (To bring supply pipe neatly over the wall of the raised bed)
• 1 of 16-12 reducer (To reduce pipe size to that of LeakyPipe)
• 1 of 12-12-12 tee (To branch LeakyPipe within the bed) 2 of 12 plugs (to seal the end of LeakyPipes)
• 1 of nail-in pipe clip (To keep supply pipe neatly in place on top of the retaining wall)

Imagine this.   Firstly, find a way of running the Supply tubing onto all the places you wish to water.  Use the Tee connection fittings and a pair of cutters, to tailor the tubing to give you a "Distribution Network" to carry the water to where you will be connecting the Leaky Pipe with the reducing connections.  Run the LeakyPipe near to the plants, - (within 30-50cm as the water will spread laterally) and plug the ends. (See this Video about fittings).

This is a great deal for raised borders, raised troughs or planters with a total area of up to 50m2. Kits includes push-fit connectors and options for Supply Pipe.

A comprehensive Kit to discreetly water up to 50m2 of raised beds or planters. Customise your kit by selecting sufficient connectors for 5-10 raised beds and choose between several options for supply pipe.

This kit includes lots of push-fit 'elbow' connectors to help fit an irrigation system to existing raised beds, borders, planters and troughs. You will need non-leaking supply pipe to carry the water up and over the wall of your bed. You can choose supply pipe to be included in your kit, or use small amounts of 1/2" garden hosepipe, which will also work with the connectors. Once at soil level, the pipe size 'reduces' down to that of LeakyPipe.  

The LeakyPipe can be laid on the surface or covered in mulch which helps water wicking away from the LeakyPipe. Arrange the LeakyPipe around your plants. Moisture spreads outwards for about 12 inches / 30cm either side. If you need to branch the LeakyPipe within the bed, 'tee' connectors are included, as are 'plugs' for the ends of LeakyPipe. A nail-in pipe clip keeps the pipe neatly in place on top of the wall of your raised bed / border. Lastly, a quick-connect hose-snap connector will allow connection to your garden hose.  

This Kit includes a 100m roll of LP12H LeakyPipe, which is designed to be ideal for general purpose watering, working up to 50metres from the barbed connections.  It has proven to last in excess of ten years.

How to customise your kit 

1. Select the number of raised beds you have
2. Select if you would like any supply pipe (size and length). The fittings will be adjusted to ensure they are compatible with your selection.
3. Double check the total area of your beds do not exceed 50m2 - this will ensure that 100m of LeakyPipe at 50cm spacing is sufficient for your beds.

Items included:

• 100m roll of LeakyPipe LP12H Porous Rubber Hose.
• 3 of 16-16-16 tees. (allows branching of the supply pipe network) 
• 2 of 16 elbows. (may be useful for supply network) 
• 4 of 16 plugs. (A tidy way of sealing supply pipe or garden hose). 
• 2 of 12-12 connectors.  (To connect Leaky-Leaky, a useful repairer).
• 1 of HoseSnap to 16mm single connector (quick snap-on connection to regular garden hose)

Each bed will get an additional set of:

• 1 of 16-16-16 tee. (To branch supply pipe up behind your bed)
• 3 of 16 elbows (To bring supply pipe neatly over the wall of the raised bed)
• 1 of 16-12 reducer (To reduce pipe size to that of LeakyPipe)
• 1 of 12-12-12 tee (To branch LeakyPipe within the bed)
• 2 of 12 plugs (to seal the end of LeakyPipes)
• 1 of nail-in pipe clip (To keep supply pipe neatly in place on top of the retaining wall)

Imagine this.   Firstly, find a way of running the Supply tubing onto all the places you wish to water.  Use the Tee connection fittings and a pair of cutters, to tailor the tubing to give you a "Distribution Network" to carry the water to where you will be connecting the Leaky Pipe with the reducing connections.  Run the LeakyPipe near to the plants, - (within 30-50cm as the water will spread laterally) and plug the ends. (See this Video about fittings).