88 products
88 products
Sort by:
Products
Adjustable Pressure Regulator with Gauge; 20mm Compression Output Fitting.
3/4" BSP input port - 20mm compression output fitting to 20mm polytube, (supply) pipe.
This is an adjustable pressure regulator with a working range between 0.7 - 2.2bar. Pressure gauge fitted is 0-4bar and is glycerine-filled. This unit also has a 20mm compression output fitting to allow you to attach it to 20mm LDPE Black polytube and 20mm MDPE Blue Polypipe. There is an option for 16mm compression. Please ask us if you need this.
Pack of 9 fittings to bring water up and over the sides of existing raised beds, planters or troughs.
Pack of tee's and elbow's which brings water into an existing raised bed.
Simple push-fit connectors allow customisation around walls of different heights and widths.
A pack of push-fit connectors which allows creation of a non-leaking 'riser' to bring water up and over the sides of your existing raised beds. Once in the bed, the pipe size 'reduces' down to that of LeakyPipe. The LeakyPipe is laid amongst your plants on the surface of the soil or under a shallow layer of mulch/soil. A LeakyPipe 'tee' permits branching of the LeakyPipe and 2 end plugs are also included. Lastly a nail-in pipe-clip keeps the supply pipe neat on top of the wall of your raised bed.
Choose either size 16mm or 20mm supply pipe. 16mm connectors will also fit 1/2" Garden Hosepipe.
Fittings included:
- One Equal Tee (size 16/20) allows branching to the supply pipe to create a 'riser'
- Three Equal Elbows (size 16/20) allows the supply pipe to be fashioned neatly over the side of the raised bed
- One supply pipe (size 16/20) -12 reducer, Reduces pipe size from supply size to LeakyPipe size.
- One 12-12-12 tee, (allows branching of LeakyPipe in T shape).
- Two 12 end plugs (for sealing the LeakyPipe ends).
-
One nail-in pipe-clip (size compatible with your chosen supply pipe size)
Pack of compression fittings to create 'risers' to bring water up inside raised beds, planters, troughs or containers. Designed for use at the construction stage of building raised beds to create a neat look without pipes showing. Suitable for professional use in shared space communal areas or home domestic modern gardens. Compression fittings create reliable secure leak-free connections in areas that are difficult to access at a later date for maintenance. Compression fittings are compatible with blue 'mains' MDPE pipe or black LDPE pipe.
During construction, a 'riser' is created within the raised bed. At the soil surface, the compression elbow fitting will bring the pipe work level with the soil surface and allow connection to 2 lengths of LeakyPipe with simple push-fit barbed fittings. The LeakyPipe is laid amongst your plants on the surface of the soil or under a shallow layer of mulch/soil. The LeakyPipe ends are sealed with the included plugs. Overall this gives a neat look as the riser pipe and LeakyPipes will get covered by soil and not be visible.
Compression fittings are ideal for use in situations that would be difficult to access for maintenance at a later date. These are great quality compression fittings and are the ones we choose to use ourselves, owing to their reliability.
Options include size 20mm or 25mm supply pipe. Choose which size you would like and all connectors will automatically be swopped to your chosen size.
- One 20 or 25 compression Tee. (allows branching to the supply pipe to create a 'riser')
- One 20 or 25 compression elbow to 12 barbed connector (allows connection to 2 lengths of LeakyPipe)
- Two 12 end plugs (for sealing the LeakyPipe ends).
Connect LeakyPipe to non-porous supply pipe.
These simple push-fit connectors will join two unequal size pipes together. Simply push together to connect the 2 pipes. No additional fittings or clips are needed.
Available sizes include:
- 16-12 - connect 1/2" hosepipe or 16mm polytube to LeakyPipe
- 20-12 - connect 20mm polytube to LeakyPipe
- 20-16 - connect 20mm polytube to 16mm polytube or 1/2" hosepipe
SOLD IN PACKS OF 5 CONNECTORS
Connect LeakyPipe to non-porous supply pipe & hosepipes.
These will connect LeakyPipe to your supply pipe. Simply push together to connect the 2 pipes.
Available sizes include:
- 16-12 - connect 1/2" hosepipe or 16mm supply polytube to LeakyPipe
- 20-12 - connect 20mm black supply polytube to LeakyPipe
SOLD IN PACKS OF 5 CONNECTORS
Connect LeakyPipe to garden hosepipe or 16mm or 20mm supply pipe.
T-shaped connector to branch your water supply into LeakyPipe.
These connectors allow LeakyPipe to be connected to the larger non-porous pipes bringing water to your various beds and borders. The LeakyPipe can 'tee' into the side of larger supply pipes as they pass past the area you want to water.
Choose the connector you want above. '12' fits LeakyPipe, '16' fits 1/2" garden hose or 16mm polytube and '20' fits 20mm polytube. Simple push-fit barbs grip the inside of the pipe without the need for additional clips.
SOLD IN PACKS OF 5 CONNECTORS
- 16-12-16 - allows 1 LeakyPipe to tee connect into 16mm polytube
- 20-12-20 - allows 1 LeakyPipe to tee connect into 20mm polytube
- 20-16-20 - allows 16mm polytube to connect into 20mm polytube
16mm black polytube, available in 50m or 100m rolls
Non-porous pipe to supply water from the water source to the area which needs watering.
50m of a black, non-porous, semi rigid plastic pipe, suitable for using as a 'header' pipe or connecting LeakyPipe to a water point. The pipe is 16mm external diameter, similar to 1/2" garden hose and is compatible with our range of '16' barbed fittings. (eg 16-16-16 equal tees, 16-16 elbows etc). The fittings can be gently wiggled into the polytube and will grip on the internal surface without the need for additional clips. In very cold weather, if it is difficult to insert fittings, try dipping the end into a thermos flask of hot water for about 10 seconds and this will soften the pipe slightly. As the pipe cools, it will shrink onto the barbed fittings. Fittings can be rotated in the polytube without breaking the seal.
20mm black polytube, available in 50m or 100m rolls
Non-porous 20mm pipe to deliver water from its source to the areas you want to water.
50m or 100m roll of a larger diameter black, non-porous, semi rigid plastic pipe, suitable as a permanent feeder pipe for your irrigation system. This pipe is easily cut with a sharp pair of cutters and is compatible with our range of '20' barbed fittings. The fittings can be gently wiggled into the polytube and will grip on the internal surface without the need for additional clips. In very cold weather, if it is difficult to insert fittings, try dipping the end into a thermos flask of hot water for about 10 seconds and this will soften the pipe slightly. As the pipe cools, it will shrink onto the barbed fittings. Fittings can be rotated in the polytube without breaking the seal.
This LDPE (Low Density PolyEthylene) pipe is 20mm external diameter.
Ingenious, time saving, Travelling Lawn Sprinkler by Nelson
Self-propelled, Travelling Sprinkler System for large gardens and areas of grass.
Made by Nelson. Improved by us.
This is a great tool made in the USA by Nelson. It's useful to those who have a large area of lawn & desire an easy and cheap way of watering it without too much effort. Look no further! It's a garden sprinkler that moves itself.
Small selection pack of 12 connectors.
Connects LeakyPipe to 16mm or 20mm supply pipe or garden hose.
A selection pack of 12 barbed fittings which will enable a range of designs to be made up using LeakyPipe and 1/2" garden hose, 16mm or 20mm polytube supply pipe. This pack is suggested to be used with a 50m roll of LeakyPipe in terms of providing a good range and number of fittings that you may want for setting up an irrigation system. If you have 100m roll of LeakyPipe, consider a large selection pack.
The small 12mm ends will fit LeakyPipe. The larger ends can either be size 16 (fits 1/2" garden hosepipe or 16mm supply pipe) OR size 20 (fits 20mm supply pipe). Make your selection above.
This Pack of Barbed Fittings Contains:
- Two - large equal tee, (allows branching of supply pipe in T shape).
- Two - large size to LeakyPipe reducing tee, (Leaky 'tee's' out of the side of supply pipe)
- Two - reducing straight connector, (supply pipe to Leaky)
- Two - 12-12-12 tee, (allows branching of LeakyPipe in T shape)
- Two - 12-12 straight connectors, (Leaky to Leaky repair connectors).
-
Two - 12mm end plugs for sealing the LP ends.
Straight Connectors for LeakyPipe
Simple push-fit barbed connectors, sold in packs of 5 fittings.
Joins LeakyPipe to LeakyPipe to either extend the pipe, or areas of small damage can be cut out and the pipe repaired with these connectors. Simply push the connector into the pipe. No additional clips are needed.
Straight connectors are available in 3 sizes: the 12mm size here fits LeakyPipe
Other sizes to fit 16mm and 20mm supply pipe can be found under 'connectors'
Simple push-fit straight barbed connectors to join two pieces of LeakyPipe, 16 / 20mm supply pipe polytube or hosepipe. Useful for extending pipe or repairing damaged sections. No additional clips are required.
Packs include 5 fittings.
Available in 3 sizes: Choose from the the selector above.
- 12mm - fits LeakyPipe LP12
- 16mm - fits 16mm polytube supply pipe, 1/2" hosepipe, and most other "Non-LeakyPipe®" porous rubber hoses.
- 20mm - fits 20mm polytube supply pipe
Joins LeakyPipe® to LeakyPipe® (LP12 range since 1987) to either extend the pipe, or areas of small damage can be cut out and the pipe repaired with these connectors. Simply push the connector into the pipe.
A T-shaped connector for branching LeakyPipe, garden hosepipe or 16mm / 20mm supply pipe.
Each pack contains 5 fittings.
T-shaped connector to join 3 pieces of pipe of equal size, in effect 'branching'. A simple push-fit barbed fitting without the need for additional clips. Once connected, the pipe can be rotated on the fitting without breaking the seal. Choose required size as below.
- 12 - LeakyPipe LP12
- 16 - 16mm polytube or 1/2" garden hosepipe
- 20 - 20mm polytube
NB, reducing T connectors available for pipes of unequal size. These T's can be very useful, depending on how you want to lay out your system.
T-shaped connector to join 3 pieces of LeakyPipe, in effect 'branching'. A simple push-fit barbed fitting without the need for additional clips. Once connected, the pipe can be rotated on the fitting without breaking the seal.
This T-shape Connector is available in 3 sizes: the '12' size here fits LeakyPipe®.
T-Connectors for 16mm and 20mm supply pipe can be found here
SOLD IN PACKS OF 5 CONNECTORS
Tap for 16mm supply pipe or garden hosepipe.
A simple tap which allows isolation of areas from your irrigation system. Sold as single unit.
Available in 3 sizes as shown:
- 12mm - fits LeakyPipe®
- 16mm - fits 16mm polytube or 1/2" garden hosepipe
- 20mm - fits 20mm polytube
These taps allow areas of your watering system to be switched on or off as required. 12mm size allows a section of LeakyPipe to be turned off e.g. a row on a vegetable patch. 16mm or 20mm allow a whole section or your irrigation system to be shut down e.g. a particular border awaiting planting. They have a barbed push-fit connection and clips are not needed.
Please note these are NOT designed to hold back full (static) mains pressure.
Tap for 20mm supply pipe
A simple tap which allows isolation of areas from your irrigation system. Sold as single unit.
Available in 3 sizes as shown:
- 12mm - fits LeakyPipe®
- 16mm - fits 16mm polytube or garden hosepipe
- 20mm - fits 20mm polytube
These taps allow areas of your watering system to be switched on or off as required. 12mm size allows a section of LeakyPipe to be turned off e.g. a row on a vegetable patch. 16mm or 20mm allow a whole section or your irrigation system to be shut down e.g. a particular border awaiting planting. They have a barbed push-fit connection and clips are not needed.
Please note these are NOT designed to hold back full (static) mains pressure
Tap for LeakyPipe® (12mm size)
A simple tap which allows isolation of areas from your irrigation system. Sold as a single unit.
These taps allow areas of your watering system to be switched on or off as required. 12mm size allows a section of LeakyPipe to be turned off e.g. a row on a vegetable patch 16mm or 20mm allow a whole section or your irrigation system to be shut down e.g. a particular border awaiting planting.
They have a barbed push-fit connection and clips are not needed.
Available in 3 sizes as shown:
- 12mm - fits LeakyPipe®
- 16mm - fits 16mm polytube or garden hosepipe
- 20mm - fits 20mm polytube
Please note these are NOT designed to hold back full (static) mains pressure.
Versatile, Battery-powered timer for taps.
Connects to one tap and has Two outputs, both individually programmable.
Automatically water your garden while you are on holiday with a simple, reliable tap timer.
There's no easier way of getting two areas automatically watered from one water source at such a cheap price. Simply take the fitting off your tap, exposing the male thread of your tap. (Please note that this has to be a 3/4" BSP thread, normally found on any, modern Garden Tap); Then screw on the Buddy2 timer.
The two outputs of the timer can be programmed to give you differing watering times. Just attach your output fitting to those outputs and then run your piping/hose from here to the LeakyPipe, drippers or sprinklers that you've chosen to use.
Brilliantly reliable & easy to use, but do take them indoors during the Winter!
With a big dial to programme your watering times, this is just about the simplest timer available at a very cheap price. Two good quality alkaline AA batteries will keep this unit running unattended all summer.
Features:
- Simple connection to your tap (3/4" thread).
- 3/4" thread output (suitable for hose snap or compression fittings).
- Programmable by watering duration, time of day and day of week (eg twice per week)
- Manual bypass for easy tap use.
- Rain delay for water conservation.
- Dimensions. 170mm Ht * 170mm W * 60mm D
Please bring this timer inside over winter to protect from frost damage.
For outdoor use with cold water only.
Ever-Popular, Easy to use Battery-powered watering timer for taps.
Single output.
Automatically water your garden while you are on holiday with a simple, reliable tap timer.
Be More Efficient using our Automated Tap Timer
With a big dial to programme your watering times, this is just about the simplest timer available at a very cheap price. Two good quality alkaline AA batteries will keep this unit running unattended all summer.
Features:
- Simple connection to your tap (3/4" thread).
- 3/4" thread output (suitable for hose snap or compression fittings).
- Programmable by watering duration, time of day and day of week (eg twice per week)
- Manual bypass for easy tap use.
- Rain delay for water conservation.
- Dimensions 170mm Ht * 130mm W * 60mm D
Please bring this unit inside over winter to protect from frost damage.