88 products
88 products
Sort by:
Products
25mm Compression Tee to LeakyPipe connector.
(1 or 2 LeakyPipe output options)
Connect 25mm blue 'mains' pipe to 1 or 2 outputs of LeakyPipe.
Use these fittings where the water is supplied to the garden in 25mm blue MDPE 'mains' pipe. The compression fitting is elbowed so that outputs are at 90degrees, very useful when the blue pipe is vertical as a 'riser' pipe. The output end is a barbed fitting which simply pushes onto the LeakyPipe.
The following outputs are available:
12 - fits LeakyPipe as single or double output
16 - fits 16mm polytube as single or double output
20 - fits 20mm polytube as single or double output
Sold as a single unit, pre-assembled with PTFE tape. The fitting can be rotated once assembled without breaking the seal.
3/4" Male BSP threaded adaptor with barbed end to fit LeakyPipe® LP12 Porous Hose or garden hose or 16mm or 20mm polytube supply pipe.
A plastic adaptor with a 3/4" male thread converting to a barbed end of various sizes. Select the size you want above.
12mm - fits LeakyPipe® LP12 Porous Hose
16mm - fits garden hosepipe or 16mm supply polypipe
20mm - fits 20mm supply polypipe
SOLD IN PACKS OF 5 CONNECTORS
Adjustable Pressure Regulator
An adjustable pressure reducing valve.
An Adjustable Pressure Regulator is a device that will adjust itself to allow a suitable downstream pressure in your pipework/Leaky Pipe. It will do this automatically as the input pressure may vary. It has a 3/4" female input and a 3/4" male output.
Adjust the downstream pressure between 0.7-2.3Bar with a Flat Screwdriver.
A fully comprehensive Garden Hose Kit of LeakyPipe, SupplyPipe, Timer and Connectors for the person who wants to put an automatic watering system together, really quickly!
Trust LeakyPipe® to water your investment. This is a great deal for 100metres of LeakyPipe, Connections, SupplyPipe; Timer to take the watering chore away from Gardening.
This 100 metres package is tailored for an application that may use a variety of lengths from 100 to 150 metres of LeakyPipe. So there's scope to add more later, should you wish. This Kit uses LP12H LeakyPipe, which is designed to be ideal for general purpose watering.
This LeakyPipe is specifically manufactured by us to work on top of the ground, if you wish, but it's better sub-mulch or soil, working up to 50 metres from every barbed connection. It has proven to last more than ten years. Ideal for watering beds and borders, planters, trees and hedge lines (up to 50m long). It operates under water pressures of up to 2.5 bar. Ideal would be between 1-2Bar (15-30psi).
High-quality items included:-
- 100metre roll of LeakyPipe® LP12H Porous Rubber Hose.
- 50 metres of external diameter 16mm Black LDPE Supply Pipe.
- 1 of Orbit made, "Buddy One" Timer for Tap Connection. See here
- 5 of 16-12 Reducer Connectors. (Supply to LeakyPipe).
- 10 of 16-12-16 Reducer Tees. (Supply-Leaky-Supply).
- 3 of 16-16-16 Tees. (Supply-Supply-Supply).
- 5 of 12-12-12 Tees. (To "Branch" LeakyPipe to itself).
- 15 of 12 plugs. (A tidy way to plug LeakyPipe ends).
- 2 of 16 plugs. (A tidy way of sealing 16 supply pipe).
- 2 of 12-12 hose connectors. (To connect Leaky-Leaky).
- 2 of 16-16 hose connectors. (To connect supply pipe to your hosepipe if you wish)
A full 250m Garden Hose Kit including LeakyPipe®, non-porous Supply Pipe, Timer and Connectors
Spend a bit more and buy the best LeakyPipe; from the people who have made it the longest. A great deal for 250metres of LeakyPipe, Connections, SupplyPipe and two-zone Timer.
Ideal for the person who wants to put an automatic watering system together, really quickly!
Stop dragging garden hose pipe around and look no further. Leaky Pipe Systems has been manufacturing for years, the best irrigation systems including this 250m garden hose kit.
This 250metre package is tailored for an application that may use 250-500metres of LeakyPipe. So there's scope to add more later, should you wish. This Kit uses LP12H LeakyPipe®, which is designed to be ideal for general purpose watering.
Our 250m Garden Hose Kit is an innovative, professional system
This LeakyPipe 250metre hose pipe kit is specifically made by us to work on top of the ground, if you wish, as well as sub-surface, sub-mulch; working up to 50metre lengths from the barbed connections to hose or polypipes. Designed for professionals, it will bring you full satisfaction. Our customers already love it and it is part of our best-selling garden hose pipe kits. Just give it a try!
✔ The 250m garden hose kit has proven to last in excess of ten years.
This one is ideal for watering beds and borders, planters, trees and hedgelines (LP use, up to 50metres long). Although we have specific hedge watering kits that will perfectly do the job, when they are over 100metres long.
Buying LeakyPipe 250m hose pipe kit, you will also have the following items
- 250 metres of LeakyPipe LP12H Porous Rubber Hose.
- 100 metres of 16mm Black Supply Pipe.
- 1 of Buddy2 Timer for Tap Connection (With two 16mm Compression fittings).here
- 5 of 16-12 Reducer Connectors (Supply to LeakyPipe).
- 20 of 16-12-16 Reducer Tees (Supply-Leaky-Supply).
- 3 of 16-16-16 Tees (Supply-Supply-Supply).
- 5 of 12-12-12 Tees (To "Branch" LeakyPipe to itself).
- 20 of 12 plugs (A tidy way to plug LeakyPipe ends).
- 2 of 16 plugs (A tidy way of sealing 16 supply pipe).
- 5 of 12-12 connectors (To connect Leaky-Leaky).
- 2 of 16-16 connectors (connect Supply Pipe to your hosepipe if you wish)
Protect your investment in time and money on plants. Get them Growing Fast with this Great Deal for 400metres of LeakyPipe; Porous Hose, Connections, SupplyPipe, Timer with Pressure Regulators. A complete package to save plant life now!
This 400metre combo kit is tailored for an application that may use 300-700metres of leaky pipe. So there is scope to add more later, should you wish. This garden porous hose kit uses LP12H leaky pipe, which is designed to be ideal for general purpose watering.
This LeakyPipe all-inclusive combination kit is specifically manufactured by us to work on top of the ground, if you wish, as well as sub-mulch or sub-soil working up to 50metres from the barbed connections. It has proven to last in excess of ten years.
Our 400m long Garden Hose Kit ensures an efficient Garden Watering
Leaky Pipe's garden porous hose kit is ideal for watering beds and borders, planters, trees and hedgelines (up to 50metres long), lawn and plants. There is a 20mm supply pipe for good, efficient water movement and less pressure drop through your distribution network. Moreover, we have put pressure regulators on the Buddy2 zone timer for you, to ensure the system does not get over-pressurised.
Items included:
- 400 metres of leaky pipe LP12H porous rubber hose;
- 100 metres of 20mm black supply pipe;
- 1 of Buddy2 Timer for tap connection; (Assembled with two pressure regulators & two 20mm Compression Fittings)
- 5 of 20-12 Reducer Connectors. (Supply to LeakyPipe);
- 20 of 20-12-20 Reducer Tees (Supply-Leaky-Supply);
- 3 of 20-20-20 Tees. (Supply-Supply-Supply);
- 5 of 12-12-12 Tees. (To "Branch" leaky pipe to itself);
- 20 of 12 plugs. (A tidy way to plug leaky pipe ends);
- 2 of 20 plugs. (A tidy way of sealing 20mm supply pipe);
- 5 of 12-12 connectors. (To connect/repair Leaky-Leaky).
- 2 of 20-16 connectors (connect Supply Pipe to your hosepipe if you wish)
Variety of lengths available to fit a wide range of hoses. Please note that the garden hose reel is not included. You may also be interested in discovering our full range of Leaky Pipe Watering Kits & Leaky Pipe Porous Hoses.
How to use Leaky Pipe's all-inclusive Garden Hose Kit?
A discounted kit for watering raised borders, raised troughs or planters with a total area of up to 125sqm. Create a professional finish with all pipework concealed during construction of the beds. Kits are customisable for the number of raised beds and size of supply pipe. A Kit created for landscape constructors to incorporate watering facilities during the construction of raised beds or planters. The Kits comprises professional leak-free compression fittings and sufficient LeakyPipe to irrigate up to 125m2 of raised beds, planters or troughs. This kit is designed to be installed at the construction stage of creating raised beds. The fittings allow water to be brought up inside the bed or planter via a 'riser' to the surface of the soil.
This gives a neat, clean professional look. The 'network' or supply pipe is best created with 20mm or 25mm blue MDPE pipe. The blue pipe isn't included in the kit, but a tee and elbow compression fittings are included to help you create the network. Once at soil level, an elbow fitting allows LeakyPipe to be laid on the surface or covered in mulch which helps water to wick away from the LeakyPipe. Arrange the LeakyPipe around the plants. Moisture spreads outwards for about 12 inches / 30cm either side. The free ends of the LeakyPipe are sealed with the included 'plugs'.
In planning your system, think about how you want to create a network of supply pipe to carry water to each of the beds. 20mm or 25mm blue MDPE pipe is ideal for burying underground. MDPE pipe isn't included in this kit, but a tee and elbow compression fittings are included to help you create the network. Also included is a fitting to connect to your water source - options here include a compression-3/4" adaptor to create a leak-free connection with the bottom of a timer or 3/4" tap thread OR a compression to HoseSnap fitting to allow quick hook-up to standard HoseSnap fittings on normal garden hosepipe.
This Kit includes a 250m roll of LP12H LeakyPipe, which is designed to be ideal for general purpose watering, working up to 50metres from the barbed connections. It has proven to last in excess of ten years.
How to customise your kit.
- Select the number of raised beds you have
- Select the supply pipe size you intend to use. The fittings will be adjusted to ensure they are compatible with your selection.
- Choose a hook-up option, dependent on how you plan to feed water into the pipework.
- Double check the total area of your beds do not exceed 125m2 - this will ensure that 250m of LeakyPipe at 50cm spacing is sufficient for your beds.
Items included:
- 250m roll of LeakyPipe LP12H Porous Rubber Hose.
- 1 of 20/25 compression to 3/4" female fitting OR 20/25 compression to HoseSnap fitting
- 2 of 20/25 compression tee. (for branching of supply network)
- 2 of 20/25 compression elbow. (for riser within terminal bed)
- 5 of 12-12 connectors. (To connect Leaky-Leaky, a useful repairer).
Each bed will get an additional set of:
- 1 of 20/25 compression tee. (To branch supply pipe up as a riser within each bed)
- 1 of 20/25 compression elbow to LeakyPipe tee (To allow connection to 2 LeakyPipe lengths within each bed)
- 2 of 12 plugs (to seal the end of LeakyPipes)
Imagine this. Firstly, find a way of running the Supply Pipe onto all the places you wish to water. Use the compression fittings to tailor the pipe to give you a "Distribution Network" to carry the water to each raised bed. Compression tee under each bed will allow creation of a 'riser' to bring the water to the surface of the soil. Here you will be connecting the Leaky Pipes via the compression elbow. Run the LeakyPipe near to the plants, - (within 30-50cm as the water will spread laterally) and plug the ends. (See this Video about fittings).
A discounted kit for watering raised borders, raised troughs or planters with a total area of up to 50m2. Create a professional finish with all pipework concealed during construction of the beds. Kits are customisable for the number of raised beds and size of supply pipe.
A Kit created for landscape constructors to incorporate watering facilities during the construction of raised beds or planters. The Kits comprises professional leak-free compression fittings and sufficient LeakyPipe to irrigate up to 50m2 of raised beds, planters or troughs.
This kit is designed to be installed at the construction stage of creating raised beds. The fittings allow water to be brought up inside the bed or planter via a 'riser' to the surface of the soil. This gives a neat, clean professional look. The 'network' or supply pipe is best created with 20mm or 25mm blue MDPE pipe. The blue pipe isn't included in the kit, but a tee and elbow compression fittings are included to help you create the network. Once at soil level, an elbow fitting allows LeakyPipe to be laid on the surface or covered in mulch which helps water to wick away from the LeakyPipe. Arrange the LeakyPipe around the plants. Moisture spreads outwards for about 12 inches / 30cm either side. The free ends of the LeakyPipe are sealed with the included 'plugs'.
In planning your system, think about how you want to create a network of supply pipe to carry water to each of the beds. 20mm or 25mm blue MDPE pipe is ideal for burying underground. MDPE pipe isn't included in this kit, but a tee and elbow compression fittings are included to help you create the network. Also included is a fitting to connect to your water source - options here include a compression-3/4" adaptor to create a leak-free connection with the bottom of a timer or 3/4" tap thread OR a compression to HoseSnap fitting to allow quick hook-up to standard HoseSnap fittings on normal garden hosepipe.
This Kit includes a 100m roll of LP12H LeakyPipe, which is designed to be ideal for general purpose watering, working up to 50metres from the barbed connections. It has proven to last in excess of ten years.
How to customise your kit.
- Select the number of raised beds you have
- Select the supply pipe size you intend to use. The fittings will be adjusted to ensure they are compatible with your selection.
- Choose a hook-up option, dependent on how you plan to feed water into the pipework.
- Double check the total area of your beds do not exceed 50m2 - this will ensure that 50m of LeakyPipe at 50cm spacing is sufficient for your beds.
Items included:
- 100m roll of LeakyPipe LP12H Porous Rubber Hose.
- 1 of 20/25 compression to 3/4" female fitting OR 20/25 compression to HoseSnap fitting
- 1 of 20/25 compression tee. (for branching of supply network)
- 1 of 20/25 compression elbow. (for riser within terminal bed)
- 2 of 12-12 connectors. (To connect Leaky-Leaky, a useful repairer).
Each bed will get an additional set of:
- 1 of 20/25 compression tee. (To branch supply pipe up as a riser within each bed)
- 1 of 20/25 compression elbow to LeakyPipe tee (To allow connection to 2 LeakyPipe lengths within each bed)
- 2 of 12 plugs (to seal the end of LeakyPipes)
Imagine this. Firstly, find a way of running the Supply Pipe onto all the places you wish to water. Use the compression fittings to tailor the pipe to give you a "Distribution Network" to carry the water to each raised bed. Compression tee under each bed will allow creation of a 'riser' to bring the water to the surface of the soil. Here you will be connecting the Leaky Pipes via the compression elbow. Run the LeakyPipe near to the plants, - (within 30-50cm as the water will spread laterally) and plug the ends. (See this Video about fittings).
Elbow-shaped connectors for LeakyPipe, garden hosepipe or 16 / 20mm polytube supply pipe.
A plastic elbow suitable for making tight corners with LeakyPipe. Simple push fit, no additional clips are needed.
Available in 3 sizes
- 12mm - fits LeakyPipe®
- 16mm - fits 16mm polytube and garden hosepipe
- 20mm - fits 20mm polytube
SOLD IN PACKS OF 5 CONNECTORS
Push-fit, elbow-shaped connectors for LeakyPipe.
A plastic elbow suitable for making tight corners with LeakyPipe. The LeakyPipe itself is quite flexible and will easily curve around a 6" diameter, so the elbows are only really needed for the tightest corners. Simple push-fit, no additional clips are needed.
Available in 3 sizes: the 12mm size sold here fits LeakyPipe®
If you want to 'elbow' hosepipe or 16mm or 20mm polytube supply pipe, look under 'elbows'
SOLD IN PACKS OF 5 CONNECTORS!
End plugs to seal the ends of LeakyPipe, hosepipe and 16 / 20mm supply pipe. Simply push these fittings into the ends of your pipes to seal them off.
Push-fit, barbed plugs to seal the cut ends of your pipes.
SOLD IN PACKS OF 5 CONNECTORS!
Available in 3 sizes:
12mm - fits LeakyPipe® LP12
16mm - fits 16mm polytube supply pipe or 1/2"hosepipe
20mm - fits 20mm polytube supply pipe
Push-fit, barbed plugs to seal the cut ends of your LeakyPipes. Simply push these fittings into the ends of your pipes to seal them off.
SOLD IN PACKS OF 5 CONNECTORS
Available in 3 sizes: the 12mm size sold here fits LeakyPipe LP12
If you want to plug hosepipe or 16mm or 20mm polytube supply pipe, look under 'end plugs'
50m Roll of LeakyPipe LP12EQ Equestrian Arena System repair kit
Manufactured by us, here in Kent, to ensure very high standards, for specific, sub-surface use in Equestrian Sand Constructions .
LeakyPipe®LP12EQ 50m Roll for Repair & Maintenance of Sub-Surface Networks in Riding Arenas, Gallops & Menages.
10 of 12-12 barbed connectors included.
Cut and splice into your existing system, as needed.
Filter and Pressure Reducing Valve Set.
(Filter cartridge and brass connectors included)
A pre-assembled filter and pressure regulator kit with options of input / output fittings.
This kit is ideal if your water source is unclean e.g. borehole and the pressure either too high or erratic. The unit is preassembled and you just need to connect it into your system, using either brass 'snap' fittings, 16mm or 20mm compression fittings, depending on the non-porous supply pipe you are using. Water goes through filter first, then the pressure reducing valve.
Includes a 10" long pleated filter which can easily be removed for cleaning or replacement. A commercial grade filter which filters down to 22micron.
Make sure it stays free of frost, so drain it out for overwintering.
Includes bracket to mount the unit on a wall or fence (fixings not provided) and spanner to tighten the body of the filter onto its top.
Filter cartridge for 10inch filter bodies
Pleated 10" filter cartridge.
A filter cartridge to fit 10" filter housing. This pleated cartridge is the best quality available and catches particulate above 22micron.
The cartridge can be easily removed for cleaning or replacement if the dirt becomes too embedded!
Pleated filter cartridge for 10"filter housings. Can be cleaned and reused by washing under running water.
Filter Housing - 10inch clear body
Cartridge, wall mount and bowl spanner included.
Filter housing body with cartridge, wall mount and bowl spanner.
This filter housing can be connected into your water supply if the water source is not clean e.g. from bore hole or storage tank. A filter will prevent any dirt particles entering the LeakyPipe which could eventually lead to a blockage. It is not necessary for normal household garden taps on mains connection.
This filter contains a 10" pleated cartridge thus ensuring the best protection. It catches particulate down to 22micron.
It has brass lined 3/4" female BSP entry / exit ports.
The cartridge can be easily removed for cleaning.
Make sure it stays free of frost, so drain it out for overwintering.
The wall mount does not contain fixings as you will need to select these to be suitable for brick / wood etc.
Proven to last and relieve you from the work of watering your plant collections, everywhere. A kit of 100m of LeakyPipe with a selection of 27 connectors including HoseSnap fittings for Planters, Beds and Borders.
Try the original 100m roll of LeakyPipe® Hose Pipe Kit
✔ Designed to water newly planted and established herbaceous borders.
This watering kit includes a superb porous hose which weeps water along its length.
This is a cost-effective leaky pipe irrigation system to water your garden borders. Includes 100m roll of LeakyPipe® with push-fit barbed connectors. Cut the LeakyPipe® LP12H into lengths as you lay it out and connect together to your hosepipe or 16mm black, Supply Pipe. You can work the whole 100metres at one time, evenly.
A typical household tap pressure can water up to 300m LeakyPipe at one time. So you won't need the tap on much for all 100metres to work! This high quality rubber hose pipe will not perish or be affected by frost.
✔ It is reasonably flexible so you can snake it back and forth to water your borders, beds and shrubs.
✔ Specifically designed to easily water newly planted and established herbaceous borders, trees and hedgelines shorter than 100m.
✔ Includes connectors. Always in stock!
✔ It has proven to last in excess of ten years.
Buy a reliable hose pipe kit & Save time to water your plants. Arrange as rings or spiral around newly planted trees to aid their establishment. It works most efficiently when covered by a mulch or soil as evaporation is reduced. Overall you use less water with LeakyPipe than watering by hand and it will work out-of-sight whilst you enjoy your garden.
This hose pipe kit uses LP12H LeakyPipe
The LP12H is designed to be ideal for general purpose watering. This garden hose pipe is specifically manufactured by us to work on top of the ground, if you wish, as well as sub-mulch, working up to 50metres from the barbed connections. See video information here.
Buy this great quality hose pipe kit, which includes:
- 100 metres of LeakyPipe LP12H Porous Rubber Hose. This LeakyPipe® is not designed to used from a water butt, without pumping.
- 5 of 16-12 Reducer Connectors (Supply to LeakyPipe®).
- 5 of 16-12-16 Reducer Tees (Supply-Leaky®-Supply).
- 1 of 16-16-16 Tees (Supply-Supply-Supply).
- 2 of 12-12-12 Tees (To "Branch" LeakyPipe® to itself).
- 10 of 12 plugs (A tidy way to plug LeakyPipe® ends).
- 2 of 16 plugs (A tidy way of sealing 16 supply pipe).
- 2 of 12-12 connectors (To connect Leaky-Leaky).
- 1 of Hosesnap-12 connector (Hose to Leaky®)
- 1 of Hosesnap-12tee connector (Hose to two Leakies)
N.B. 16 will fit both Supply piping and 1/2" garden hose, (even though the latter is a tight fit). Also available in 50m, 100m, 250m, 400m rolls, with and without connections.
See this narrated video on system concepts and design.
Or the silent Video about LeakyPipe layout in Gardens on the next tab